Bosch logix8 comming up with the code nro

SOURCE: Bosch Axxis front loader will not drain

check filter. check no foreign objects fouling pump impellor - bra wires are the favourite

Posted on Apr 25, 2007

Barry Coates

• 3463 Answers

SOURCE: Bosch Classixx 1200 Express wont spin!!!! HELP

Make sure that all the water has drained from the washer, if it has a filter, remove and clean, it is located behind a removable plastic panel at the front of the m/c, if it still does not spin, suggest you remove motor and check the brushes for wear, this is often the reason it won't spin, but will wash o/k.
Plz rate my solution.
Thanks

Posted on Dec 22, 2008

SOURCE: bosch exxcel wf02465 wont spin

We had similar problem, with the spin cycle not working. We opened the 'drain' pipe (front-right bottom side). It was full of lime scale; never been opened for years. We cleaned it up and the spin cycle is now working.

Posted on Sep 13, 2009

SOURCE: bosch washing machine flashing red lights

all lights are flashing on bosch classixx express no thinh working no water intake door is locked what is the problem and can i do it myself

Posted on Jan 07, 2010

SOURCE: BOSCH Maxx washing machine will drain and fill but

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Plug off the wall first. Remove the front lower panel, screws underneath. Be prepared for water, drain out from drain hose. Check filter for clogging, clean out. Sometimes when the load is unbalanced & the machine cannot adjust the load it stops. To avoid this make sure your wash is mixed with big and small clothes.
If this does not work remove the rear panel & check belt, should have half inch ‘give’. Still not good, remove belt, unscrew 2 bolts that hold the motor, unplug the motor connector, lever the motor back with a screwdriver. Check the motor brushes (at terminal end of motor), if they are any shorter than 1 cm replace brushes.
Try these sites for spares:
RepairClinic.com
espares.co.uk
AppliancePartsPros.com
mcminone.com

Pl click 'very helpful' for the free help, thnks.

Posted on Jun 16, 2010