Hdtv-dlp has no sound or picture

My tv hdtv-dlp has no sound or picture. When I turn the tv on the lamp light comes on and flashes for about 45 seconds to 1 minute then the lamp light shuts off but there is no picture or sound on the tv. I can access the menu, change the channels, and lower and raise the volume. but when I go to the tv/video button, when I try to scroll down from attenna it will not move. I have my dvd hooked up to video 1 connection but it is not recognizing it. The tv also will not turn off by the power button, I have to unplug the tv for the power to shut off. If anyone has any solutions it would be greatly appreciated. Thanks so very much.

didi123 Mar 08, 2008

yes i do have the same problem can not see anything on screen can not hear sound nothing works just the red light on i hear it clicking when i turning it is all
Anonymous Apr 27, 2008

only the red stand-by light comes on, need help....

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.
Contributor
7 Answers

This sounds like an o-so familar problem. It sounds like the Switching IC or the MICOM has failed

Posted on Nov 10, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

DLP powers down after 1 minute; no sound or audio

REPLACE LAMP IF PERSISTENT REPLACE THE LIGHT ENGINE COS THE COLOR WHEEL IS WORN OUT

Read full answer

Jul 07, 2013 • Televison & Video

0helpful

1answer

DLP BULB BLEW RLPACED BULB KNOW WHEN TV COMES ON PICTURE TURNS GREEN & BLACK THEN WILL SHUT OFF?

possible new bulb bad or a issue with the optical light engine.

Read full answer

Nov 30, 2012 • Mitsubishi WD-65638 65" DLP HDTV

1helpful

1answer

Powers off with a blinking standby light for 45 blinks

Hi,
Yes, its clear symptoms of weak lamp that is going to end of its working life, soon tv will show you lamp light.
Replace lamp to solve the issue, lamp replacement procedure is easy and written in user manual.
Please buy Sony original lamp for good picture in tv.
Thanks.

Read full answer

May 25, 2010 • Sony KDFE50A10 50" HDTV

1helpful

1answer

Power comes on but no picture jus sound then tv knocks its self off after 5 seconds all lights r flashing on the front standby lamp and timer

Replace Lamp. Mats Has them for $99.00
and up 1-800-628-1118

Read full answer

Mar 24, 2010 • Samsung SP46L6HXX/XEU 46" HDTV-Ready DLP...

1helpful

1answer

Sound but no picture - won't stay on

you may check your lamp first. other than that i would say a faulty mains board.

Read full answer

Apr 16, 2009 • Samsung DLP HL-P4663W 46" Rear Projection...

0helpful

1answer

Hdtv-dlp has no sound or picture

this sounds like a dmd board problem. these are digital modules attached to the light engines usually. samsung, rca, hitachi, have shown similiar symptoms. some units have capacitors on the boards that can be replaced, but these are dual-layer pcb's that are tough to unsolder without proper soldering iron temperature and good small gauge solder-wick. or solder pump tool. the electolytic caps. are usually 1000uf / 10v, 330uf / 10v, or 470uf / 10v. alot of the time the capacitors will "vent" or swell-up on top which helps spot faulty component. we always increase voltage rating to 16v-25v for more reliable operation. always use 105 degrees high- temperature replacement caps.

Read full answer

Mar 08, 2009 • Toshiba 32HL67 32 in. LCD Television

0helpful

1answer

Samsung DLP won't turn on-rapid clicking sound, lamp light blinks

it was bad bulb

Read full answer

Feb 26, 2009 • Samsung HL-67A510 67" DLP HDTV

0helpful

2answers

Sony Grand Wega 55" LCD ml # KDF-55WF655 goes protective shutdown

This is the lamp going bad. For some reason, it doesn't spit out that lamp error, it just keeps refiring the lamp and it just cycles forever. When the lamp totally fails, you will get the lamp led lit. Replace the lamp to resolve.

Read full answer

Dec 07, 2008 • Sony Grand WEGA KDF-55WF655 36" Rear...

0helpful

2answers

Black screen with a Blinking lamp in the front

Hi..if your lamp is on but no picture, then your lamp is good. Your problem is the DMD board (digital mirror display board) is bad. This is very common with Samsung DLP.

Read full answer

Mar 27, 2008 • Samsung HLR5667W 56" Rear Projection HDTV

0helpful

3answers

Dlp tv will not "fire up"

if your tv is on warranty take it back to the supplier.the problem with your tv is in the power supply there is a open regulator in that circuit along with the H .O. Transistor there is a black that feeds from the HOT to the flyback which also needs to check probably it is also open.good luck my friend

Read full answer

May 06, 2007 • Samsung DLP HL-P5663W 56" TV