I have 8 telephone lines and i have 11 ext. all of them nortel t7316e charcoal and only one of them is just giving me access to 2 phone lines (1,2) and don;t let me access 3,4,5,6,7& 8 like all the others does, i already try change cable change telephone change extention and still the problem, is someone there who can help me out?
thank you
carlos
If you are fmailiar with the programming of the system, you must set the lines (3-8) to appear and ring on the extensions.
Assuming you have a later release MICS or CICS:
Press Feature ** 266344, then the installer password.
Press Show at Terminals and Sets, enter ext #.
Press
Show until you are asked for the line number, then scan through the
line appearances, and change to "Appear Only" on the lines you don't
want to ring at that set.
Repeat for each extension you want to change.
DO NOT DO THIS UNLESS YOU ARE FAMILIAR WITH PROGRAMMING.....
557 views
Usually answered in minutes!
thank you for solving the problem now i have the same problem but this time is with a meridial 8by24 all my phones cant outcall phones m7310 can you please help me out
THANK YOU YOU ARE A REAL GURU
×