Question about Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung TV will come on, sound comes on for a few seconds and stops. The picture changes sizes 3 times and the unit shuts off

When turned on. The sound comes on for a few seconds then goes off. The picture is good but after 10 to 15 seconds the set clicks and the picture resizes, sound comes back on for a few seconds and goes off again. This runs a cycle 3 to 4 times ant the TV shuts off. The lights on the front are in the STANDBY/HEAT. The Color Wheel, Fan2 and Lamp have all been replaced.

Posted by Jerry Layde on

  • 1 more comment 
  • Jerry Layde Apr 11, 2012

    I need further input? What is dmd? I have made sure the problem was not the input mode. Tried VCR, DVD and PC. All have the same results. Have unplugged and reset with at least 3 minutes in the no power mode at all. When plugged into the AC outlet... let stand for at least 1 minute before hitting the power button.

  • SD Tech
    SD Tech Apr 11, 2012

    The DMD is the metal box with a lot of round holes punched in it that the two cables from the color wheel plug into---it communicates with light engine to and from main chassis---if bad not worth fixing--better to replace entire engine.

    One other stupid suggestion--cannot hurt---blow the set clear of all dirt/dust especially the three fans(lamp, dmd fan, and another.

  • Jerry Layde May 20, 2012

    I have checked the flat ribbon cable from the color wheel, it is correctly installed. When I replaced the lamp, the TV worked correctly for a week. Then the picture sizing and cycling started.

×

Ad

1 Answer

SD Tech

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 14,553 Answers

Suspect number one is not fan, lamp or Color wheel--optical light engine with dmd is.

Posted on Apr 10, 2012

  • SD Tech
    SD Tech Apr 11, 2012

    An after thought= if this started after color wheel was replaced--look at the two cables from it to the DMD---the flat ribbon cable only has contacts on one side and can be inserted backwards........not in most instructions for replacing the wheel.

    Contacts on that cable usually face the rear of the set.

  • SD Tech
    SD Tech May 20, 2012

    based on what you have told me I have no further suggestions short of being there.

×

Ad

3 Related Answers

Cary Leonardt

  • 304 Answers

SOURCE: samsung model # HLP5063WX/XAA 3 lights blinking

It can be the Lamp Ballast as well as the Color Wheel.

Posted on Jul 16, 2009

Ad
Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: Samsung HLP4674W - changed bulb - still no picture - lights flash

If the lamp has been replaced I would think the Lamp ballast would be most likliest followed by the color wheel and then the Digital board. You can get any part needed for your model at www.tvrepairworld.com just leave them a email they respond quickly.

Posted on Aug 28, 2009

Anonymous

  • 556 Answers

SOURCE: Samsung HLR5067W replaced color wheel, LAMP light blinks

according to samsung this is indeed the problem.

Posted on Oct 20, 2009

Testimonial: "Excellent expert advice. Confirmed what I believed to be the problem and it was. Very knowledgable"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LG tv will go on then after a few seconds the screen goes from black back to picture of and on a few times then shuts off. Help!


LG LED TV has no picture (black screen) but still sound ...

www.tomsguide.com/answers/.../led-picture-black-screen-sound-fixed.ht...
7 days ago - My 32' LG LED TV has suddenly lost picture! The sound is all right but theScreen is pitch black. After switching it on the picture flashes for a second and thenthe ... LG LED TV has no picture (black screen) but still sound - can it be fixed? Tags: ... a touch on the screen reveals nothing so it's not the back light.

Monitor going black after 2 seconds [Solved] - CCM.net

ccm.net > Forum > Hardware
Oct 9, 2012 - Brightness goes down, display draws less juice, and you can at least use .... it's the LCD's Inverter ... you have to replace it for it to go back to ... If the screen is turning off every two seconds or so and then it comes ... i turn my tv on it comes right on, but then after a few minutes turns off, .... Digital Trends for LG. No display in monitor
Jan 11, 2013
Ps3 and hdmi cable
Oct 8, 2012
More results from ccm.net

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA

Dec 20, 2015 | LG Televison & Video

1 Answer

I was watching TV and suddenly the screen went black. No picture, no sound. On/off timer LED on TV started blinking. I could not turn it on (or off) with remote or ON switch on TV. I found that if I...


The television is shutting itself off to protect itself. The blinking light is a code pattern. The specific code determines whether or not you need an LCD Controller Unit, Main Board, power supply or something else. You would need the service manual. There are parts distributors you can get it from and the parts as well. If soldering and tv repair is not something you are entirely familiar you may want to seek a tv repair person. The manufacturer's support may walk you through the service menus to complete a factory reset depending upon the symptoms.

Sep 28, 2010 | Televison & Video

2 Answers

No picture few seconds sound coming


Sounds like you got a bad logic board inside this unit with defuncted capcitors looks like salvation army time..

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Oct 03, 2009 | Samsung TXJ2554 TV

1 Answer

TV turns on and then, after a few seconds, picture changes to "double vision".


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 25, 2008 | RCA P46921 46" Rear Projection Television

1 Answer

Samsung no picture


There are several capacitors that are known, in Samsung TV's that go out.. ( I replaced mine until the board was burnt through.. bought a new board, they went out again.. BOUGHT A LG TV!!)
Samsung settlement warrants older TVs with faulty capacitors

Samsung LCD Plasma TV Capacitor Repair Kit Replacement Parts

replacing these is not hard at all.. if you can use a soldering iron, you can do it..it just takes time..

Repair Samsung LCD TV Relay Clicks Shuts Off Won Come On

WATCH THESE VIDEOS FIRST.

Samsung TV Won Turn On How to Repair Bulging Capacitor for Clicking Noise

My Repair of 46 Samsung LCD TV with Bad Capacitors

Jul 18, 2017 | Samsung - Projection TV replacement lamp...

4 Answers

Camera shuts off after a few seconds


i had that problem with another camera i toggled with the lens it went in and works like a charm. Dont be to gentile it will go in

Oct 08, 2008 | Samsung S630 Digital Camera

1 Answer

Won't turn on


those tvs will try 3 times before completely shutting down. you can try and take the back off and check CP150 it is a large capactior located near the middle of the board on the left hand side(looking from back) if it looks and feels like the top is vented or puffed out then that could be the problem. if not i suggest having a qualified service tech take a look because there are too many things that could be the root cause.

Apr 07, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Samsung HLR5667W 56" Rear Projection HDTV Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76443 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...