Question about Canopus Televison & Video
Very recently I have installed a Canopus ACEDVio Card for my digital editing. Am using EDIUS for all my editing. The installion of the hardware and sofware went fine. The drivers are installed correctly. I have connected a Video out to my Television set and for capturing am using a DV Camera. However, am still unable to view what I edit from the Television set. Please instruct me on how i may deal with this. Thanks
dear jose thomas
Just trying using a canopus 4.0 for your ACEDvio ..it compatible with your canopus DVstorm
and your problem can solve with a correct codect or using edius 4.0 to capture your video
ok, post in me back
Posted on Mar 17, 2008
SOURCE: cant capture video
Not having camcorder control is normal, as the ADVC110 doesn't translate DV (AV/C) control to anything else. It just accepts and replies to deck control commands so the capture application doesn't get stuck waiting for a response.
First off, make sure you only have the ADVC110, your VCR, and your computer connected. No other Firewire devices.
Be sure your have the output from your VCR connected to the ADVC's input. Connect your VCR's output to your TV. You should see in iMovie the same image you see on your TV, slightly delayed.
Posted on Aug 11, 2008
May i suggest that if the Canopus is stuck and both lights are on it may well be faulty but try this first.
slowly insert the fire wire into the back of the Canopus slowly does it when one light comes on stop inserting the fire wire and press input select till the lighth moves to the other side in my experiance digital to anolog,this may take a fiew goes and seem primative but it has worked for me and then eventialy the canopus corrects its self if this has been helpful please put a pound in the charity box of your choice and email [email protected] just to let me know good luck bye.
Posted on Aug 20, 2008
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: