Question about Tao TXM1020 XM2GO Satellite Radio Receivers

Open Question

TAO xm2go auto casette problem

My TAO xm2go works fine in my home and when I use the FM frequency mode in my car. But when I insert my supplied casette adapter into my tape player I get 5 seconds of regular programming then a series of loud beeps every 2-3 seconds with no other sound. I contacted the manufacturer and received another caseette adapter, but the same thing happened. It occurs in my wife's car, so it doesn't appear to be the car. Any advice?

Posted by Gregg Anderson on

  • pearleaf Dec 03, 2007

    Our xm2go car kit worked fine for several months but suddenly I have this same problem. The cassette player seems to be looking for a tape and, finding none, ejects the unit. I had this same problem years ago with CD-player car kits in some cars. Is the problem in the cassette player rather than the unit?

×

Ad

4 Related Answers

johnychel

isaac johny

  • 796 Answers

SOURCE: XM2Go Tao Display Problem

have you tried resetting it??

Posted on Mar 05, 2008


ejkudelka

EJ Kudelka

  • 1188 Answers

SOURCE: Can no longer transmit on Tao XM2go to unused FM

Very sorry, , there isn't anything other then that

Posted on Nov 27, 2010

Ad
alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: Can no longer transmit on Tao XM2go to unused FM

these things are controlled by a crystal diode and this is faulty ,its lost its value ,take it to a repairman who can renew the frequency diode for you its not a expensive job as its not a difficult job to do .

Posted on Dec 02, 2010

tss-radio

TSS Radio

  • 62 Answers

SOURCE: my tao xm2go unit is transmitting a very weak fm signal to my car radio. I can barely hear the audio.

You likely need to directly connect. In most cases the FM transmitter is too week to broadcast through FM stations, and a direct connection will clear up your issue. It could be as simple as connecting via an Auxiliary cable or Cassette Adapter. If you don't have the ability to use one of those, you can get an Auxiliary Input Adapter. Another solution would be an external FM Transmitter, with a larger range.

Posted on Jun 29, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

No sound comes out of radio?

Turn up the volume by pressing the top of the center cluster of buttons. Does it work in the home dock or car dock without headphones?
0helpful
1answer

My tao xm2go unit is transmitting a very weak fm signal to my car radio. I can barely hear the audio.

You likely need to directly connect. In most cases the FM transmitter is too week to broadcast through FM stations, and a direct connection will clear up your issue. It could be as simple as connecting via an Auxiliary cable or Cassette Adapter. If you don't have the ability to use one of those, you can get an Auxiliary Input Adapter. Another solution would be an external FM Transmitter, with a larger range.
0helpful
1answer
0helpful
1answer

My Tao won't turn on and when I put it in the craddle all it does is blink

Probably bad battery. XM actually recalled original batteries and supplied new replacements.
0helpful
1answer

Failure of the battery to charge while in the home cradle

Wall transformer is bad or was replaced with lower amp unit. Same thing can happen with aftermarket car charger. Possible solution without replacing transformer: turn off LCD backlighting....
0helpful
1answer

My tao xm2go will not turn on

Dear Glen,

My Tao solution is to buy the Delphi MyFi which appears to have an identical interface. See page 10 here: http://file.xm411.com/manuals/MyFiUserGuide411.pdf . This is expensive but service in not available.

digitally,
(/\/\<erwin
0helpful
1answer

Atenna connection when using Altec Speaker or Car Kit

Dear xm2go,

I could not find any service options for my own Tao XM2go unit. The only option appears to be the Delphi MyFi unit which appears to be identical (see page 10 here: http://file.xm411.com/manuals/MyFiUserGuide411.pdf )

digitally,

(/\/\<erwin
0helpful
2answers
0helpful
2answers
0helpful
1answer

Tao XM2go shuts off for no reason

You could try taking the batteries out and cleaning the contacts, replacing the batteries and/or using sellotape to hold the batteries in place. They could be loose and disconnect when you move it in a certain way. If not the batteries, you could try further dismantling and cleaning, but you may just end up with a clean ball of sellotape that still has problems...! worth a try. stoodleysnow
Not finding what you are looking for?
Tao TXM1020 XM2GO Satellite Radio Receivers Logo

Related Topics:

53 views

Ask a Question

Usually answered in minutes!

Top Tao Audio Players & Recorders Experts

Ekse

Level 3 Expert

13435 Answers

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

The Knight
The Knight

Level 3 Expert

76719 Answers

Are you a Tao Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...