Toyota overlocker I tried to overlock a pair of jeans and because of the thickness at the seam my machine locked.is there anyway i can fix it myself?

Flatlocking made easy Serger Pepper

Flatlocking Tutorial from Sew Journers Hey June Handmade

Flatlocking compared to cover stitching and overlocking

...

A serger (overlocker) is not a sewing machine. If you look at the inside seams of a purchased t-shirt, you will usually find a serge stitch that was created using a serger (overlocker). A serger/overlocker usually uses 3 or 4 threads to create that stitch. It also trims the fabric at the same time it finishes the fabric edge. The serge stitch is a chain stitch that, if you pull a particular thread, the entire stitch will come undone.

Your sewing machine is not able to create that same stitch. Your sewing machine may have what is called an "overlock" stitch, but it will use only 2 threads (the top and bobbin) to create that stitch. You would have to consult your owner's manual to see if it can make an overlock stitch.


Different Serger Stitches and How to Use Them

The BERNINA Serger Overlocker line BERNINA

Overlocker Serger Vs Coverstitch Machine What the Difference...

The owner's manual would be the best source for that information:

Instruction Manual Elna 744

Elna 744 Overlock Sewing Machine Manual Pdf

Elna 744 Sewing Machine Manual OverLock Instructions

You didn't mention your model, but there is a small jig you can buy that will lift up the presser foot to ride over the seam. It's called a "Jean-a-ma-jig," by Dritz, and It only costs around $5.00. You can probably find it at a local fabric store, or you can get it from eBay or Amazon.

How to stitch a dress seam with overlocker

Take a look on amazon for Bernina sewing machines... You can find there various prices (100% cheapest on the net). Here: . Amazon com bernina sewing machines. I hope this was helpful. Cheers

It sounds like the timing needs to be reset by a sewing machine repair tech.

To use a 3 thread overlock, thread the overlooper; the underlooper and then use ONE of the needles. Removing the RIGHT needle will produce a 5mm or 1/4" seam. Removing the LEFT needle will produce a 3mm or 3/16" seam.

A overlock machine helps you clean finish the seams. You can do many things with a overlock It can cut your sewing time down. The sewing machine is good for many thing too,Mostly the construction of the garment. I have three machines. A indstrialstraight stitch, a home machine and a overlock.Al for different tasks.