Tried Brand new batterys (nimh) and still no power turn on. Press reset nothing move or cahang at all. What's wrong with it? Never been in water or sand. Anybody got any clue?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, you can get new battery holder that comes with cover, part number is as follows: 175648311.... HOLDER, BATTERY (WITH TERMINAL Silver) DSC-W1 Camera will take apart to replace battery compartment. Hope these info will help you. Thanks.
This is a common problem related to batteries. Use 2100mA or higer batteries fully charge batteries. This problem occurs when you use alkaline batteries or faulty NiMH batteries. To solve the problem try with new fully charged NiMH batteries.
I'm not sure if this will help but you might want to try removing the memory card and powering it back up. If the camera stays on than there is probably something wrong with the card. Try a new card and see if that helps.
sounds like a battery power problem or problem with the terminal of the camera ; you know the point where the battery meets the camera.
I would recommend a service center
Make sure you use good, high-power batteries. I had a camera that couldn't use cheap batteries, as they didn't have enough juice.
Check the battery contacts in your camera tho see if there may be corrosion or shorts that may drain the batteries when you insert them.
Exact same problem! Repair shop is the only option.
×