WAVETEK 3000B SERVICE MANUAL

Ah, yes, I too used Waveteks back in the old days and I still have old PCs with serial cards in them which typically came with the PC. They were never really all that expensive to replace.
Anyway, newer PCs typically lack serial (DB9) ports/cards; and simply using a USB-to-DB9 adapter on a device designed to use a DB9 interface won't help the PC "find" the unit attached to it. Theres no easy "plug-and-play" there. The PC wants to have drivers for the unit installed manually, then with some luck something will show up in Device Manager. Conversely the old Wavetek wants to see X number of pins, etc. or it will assume somethings wrong.

There are a few "USB to RS-232 DB9 Serial Drivers" (e.g. "Prolific" brand) to be downloaded here and there, I can't tell how effective they are, depending on your PC hardware/software.

Can you watch .mp4 or .avi files? The Youtube video is over 10mb in size, so it can not be sent (gmail has a 10mb size limit on attachments). I have to cut it into several smaller pieces and can convert to another file type (the original is an mp4).

I couldn't find your exact model for free, but I did find the manual for the Wavetek FG2C. Perhaps they are similar? You can find it here: http://www.tequipment.net/assets/1/26/Documents/FG2C_FG3C_Manual.pdf

If not, you should be able to purchase the manual here: http://www.manualsdrive.com/results.php?lang=en&search=WAVETEK%20FG2A. I've never used that particular site, but the FG2A manual, installation guide, etc are listed.

Best of Luck!

assets.metermantesttools.com/manuals/RMS225A_Manual_Rev_A.pdf

You can download a free manual from this website...

http://www.tequipment.net/WavetekManuals.html

Wavetek 320B Multimeter Calibration procedure needed. Specifically what do the 6 internal calibritation pots specifically adjust. The circuit board has these numbers: MD-HD110 & 33-5205F & 9917. The calib. pots have these numbers: R06x, R031, R021, R23, R45.
[email protected]

Here it is:
http://www.tequipment.net/pdf/Wavetek/5XL10XL15XL16XL_Manual_Rev_A.pdf

go to:
www.clubdediagramas.com
they have a fee but they can get all the manuals you need.

You need to connect to another cable guys dsam and bounce the settings from theirs to yours. You will need a crossover ethernet cable.

It's the same as the sunwave 3000b so get the manual and it's dead easy.