Nike Imara Fit WR0076-410 Wrist Watch Logo

Related Topics:

Janet Michaels Posted on Nov 05, 2006

Nike Imara HRM problems

My Nike Imara HRM won't sense my heart rate anymore. I replaced the batteries in the sensor and the watch. The watch picked up the heart rate the first time, but now all the sensor does is emit a very high-pitched whine when the battery is in. I have cleaned the contacts and make sure they're touching the battery. Is there likely to be any way to repair this? Also, when I replaced the watch battery the o-ring around the cover came out and it's too stretched to put back. Any place I can find a new one.

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Dec 27, 2008

SOURCE: nike heart rate monitor triax c5

I was able to view the instructions here: (no title)
http://www.klokker24.no/ressurser/1183.pdf

Ad

Anonymous

  • 26 Answers
  • Posted on Jan 03, 2009

SOURCE: I need a new band for a Nike Triax Elite HRM Mens Watch SM0019-00

$20 Bucks about here

Anonymous

  • 4 Answers
  • Posted on May 26, 2009

SOURCE: how do I set the time for nike imara fit

How to set time(hour minutes)/date(day, month, year)/power hour on nike imara fit:
PLEASE READ CAREFULLY
STEP 1:
First hold the button for set/light.
STEP 2:
wait for the "hold to set" message to appear
once it appears, keep on holding the button until the hour is ready to be set or when the hour blinks.
TIP: Pressing the mode will enable you to choose from setting (HOUR, MINUTE, DAY, MONTH,YEAR, 12/24 HOUR FORMAT, POWER HOUR.)
STEP 3:
To set HOUR: press the start(for higher values) or stop (for lower values) button, choose whatever hour you want to set the time.
*If you are done setting the time press the set/light button, and there you have it.
If you still need to change the minutes of your digital watch proceed to step four.
STEP 4:
After, you have undergone step 1, & 2, or step 1, 2, & 3 (either way it'll still work), press the mode button and then, minute is ready to be set or when the minute blinks.
To set MINUTE:
press the start (for higher values) or stop (for lower values) button, and choose whatever minute you want to set the time.
*If you are done setting the minute, press the set/light button, and there you have it.
If you still need to change the date specifically, the day of your watch proceed to step five.
STEP 5:
To set date, specifically, DAY:
*If you have only undergone step 1 & 2, or 1, 2, & 3, you need to press the mode twice. If you have undergone step 1, 2 , 3, & 4 you need to press the mode once.
To set DAY: press the start (for higher values) or stop (for lower values) button, and choose whatever day you want to set the date.
*If you are done setting the day, press the set/light button, and there you have it.
If you still need to change the date specifically, the month of your watch proceed to step six.
STEP 6:
To set date, specifically MONTH:
*If you have only undergone step 1 & 2, or 1, 2, & 3, you need to press the mode thrice. If you have undergone step 1, 2 , 3, & 4 you need to press the mode twice. If you did it step by step until 6, press the mode once.
To set MONTH:
press the start (for higher values) or stop (for lower values) button, and choose whatever month you want to set the date.
*If you are done setting the month, press the set/light button, and there you have it.
If you still need to change the date specifically, the year of your watch proceed to step seven.
STEP 7:
To set date, specifically YEAR:
*If you have only undergone step 1 & 2, or 1, 2, & 3, you need to press the mode four times. If you have undergone step 1, 2 , 3, & 4 you need to press the mode thrice. If you skipped step 6, press the mode twice. If you did it step by step until 7, press the mode once.
To set YEAR: press the start (for higher values) or stop (for lower values) button, and choose whatever year you want to set the date.
*If you are done setting the year, press the set/light button, and there you have it.
If you still need to change the 12/24 hour format of your watch proceed to step eight.
STEP 8:
*If you have only undergone step 1 & 2, or 1, 2, & 3, you need to press the mode five times. If you have undergone step 1, 2 , 3, & 4 you need to press the mode 4 times. If you skipped step 6 & 7, press the mode thrice. If you skipped step 7, press mode twice. If you did it step by step until 8, press the mode once.
To set 12/24 HOUR FORMAT: press the start (for higher values) or stop (for lower values) button, and choose whatever format you want to set the time.
*If you are done setting the 12/24 hour format , press the set/light button, and there you have it.
If you still need to change the power hour of your watch proceed to step nine.
STEP 9:
*If you have only undergone step 1 & 2, or 1, 2, & 3, you need to press the mode six times. If you have undergone step 1, 2 , 3, & 4 you need to press the mode 5 times. If you skipped step 6, 7, & 8, press the mode 4 times. If you skipped step 7 & 8, press mode thrice. If you skipped step 8, press mode twice. If you did it step by step until 9, press the mode once.
To set POWER HOUR: press start for 3, 6, 12, 24 to set the power hour.
Press set/light to set POWER HOUR.





Anonymous

  • 267 Answers
  • Posted on Sep 30, 2009

SOURCE: how do you set the nike imara soar watch?

HI,
this is the user manual will help you to set the time.

http://safemanuals.com/user-guide-instructions-owner-manual/NIKE/IMARA-SOAR-_S

thank you,
vijay

Anonymous

  • 1 Answer
  • Posted on Jan 28, 2010

SOURCE: Need help replacing battery in my nike Imara

1. Use a coin turn the battery hatch one-quarter turn counter-clockwise
2. Remove old battery from compartment. Keep plastic cradle and replate with 395/SW927R battery. Replace the new battery positive side facing up in the plastic cradle into the metal compartment in the watch. Ensure all three little tabs line up and twist cradle to lock into place. Make sure the O-ring is in proper placement on the cover and replace the battery hatch ensuring it is sealed completely!

Testimonial: "THanks"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Polar AXN300 Heart Rate Monitor Watch HRM AXN300 is not showing pulse

I would think it is the sensor circuit in the watch. When you replaced the battery did you activate the processor all reset for the watch? I do not know on your model where or how this would be activated.

Electronic watches normally have a reset procedure for when the battery is changed. Very important the watch's processor reset is performed after changing the battery. This is not any of the user readings reset. This is a reset for the watch's processor and system. It is sometimes a contact that has to be shorted out with the jeweler's screwdriver, or it is a contact that has to be shunted, or etc., depending on the model. Maybe if you call the support for the watch they will tell you this. Normally they do not like the user opening the watch.
0helpful
1answer
3helpful
1answer

How do I set am/pm on my Nike Imara Run watch?

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Rate me, please .
3helpful
1answer

Need help replacing battery in my nike Imara Womens watch? Which way does battery go in with plastic cradle?

1. Use a coin turn the battery hatch one-quarter turn counter-clockwise
2. Remove old battery from compartment. Keep plastic cradle and replate with 395/SW927R battery. Replace the new battery positive side facing up in the plastic cradle into the metal compartment in the watch. Ensure all three little tabs line up and twist cradle to lock into place. Make sure the O-ring is in proper placement on the cover and replace the battery hatch ensuring it is sealed completely!
1helpful
1answer
5helpful
1answer

Can't figure out how to set second hand on my imara kylo running watch

Paste this link into your browser:
www.nike.com/timing
Choose country and click on CATALOG, then on IMARA, then on IMARA KYLO and then on PRODUCT RESOURCES box.
Here you can download users manual for your watch.
P.S. I was just wandering what seconds hand you were speaking about? This model is purely digital.
Do not forget to rate, please.
26helpful
3answers

Triax CV10

Nike Triax CV10 - Successful HRM reset 7 November 2008
 
I had real problems too. Even after repeatedly following the known reset steps everyone else is posting up. Here’s how I got mine going, please forgive the mind bogglingly tedious detail…
 
First make sure you’re using new good quality batteries. I used Maxell’s, bought in 10’s from Hong Kong on ebay – no problem.
 
Second, and this is the ESSENTIAL bit…move right away from the computer and any other electromagnetic sources before carrying out the known reset…
 
Third, follow the known reset steps below, adjusted to what worked for me…
 
If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit.
 
Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button.
 
The re-initialisation steps for the Nike C10 and CV10 digital HRM's is:
 
(1) reset the watch
(2) open the battery door on the chest strap
(3) move the watch to RUN mode
(4) press the reset button in the chest strap battery area without removing the battery
 
Tip - I agree with the suggestion to use a pin or needle and definitely do it with the battery in the hrm.
Tip – Thumb holds battery to stop it from pinging out, other hand performs jiggle with pin until the link is made (it links straightaway if you jiggle it just right!)
 
(5) replace chest strap battery cover…and smile!
15helpful
1answer

Can Link watch with Heart Monitor

If you can't link the hrm do as detailed in the following link If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit. Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button. The re-initialisation steps for the Nike C10 and CV10 digital HRM's is: (1) reset the watch (2) open the battery door on the chest strap (3) move the watch to RUN mode (4) press the reset button in the chest strap battery area (5) put the battery back in the chest strap (if it's not already in - it's possible to push the button without removing the battery) (6) hold both of the electrode to create a signal (probably not necessary - it usually links immediately). My suggestion is to use a very thin needle and do it with the battery in the hrm. Eventually, Nike will either eliminate the hard reset or update the manual to include this info.
Not finding what you are looking for?

147 views

Ask a Question

Usually answered in minutes!

Top Nike Watches Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

67763 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39628 Answers

Are you a Nike Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...