Leveler Leg Can you help me find a replacement part for my Sapphire speaker ST2 (purchased in 12/03)? I recently moved and the movers broke off the small metal leveler leg? Thank you!

vvv

You do not repair them. Go to home depot or Lowe's and purchase a new set. They are not expensive. If the movers broke item why are you trying to repair it? Call company and have them replace the sensors.

notify ashley furniture

I would check the balance of machine by using a leveler and checking the bottom leg adjustment on all 4 legs then check the
suspension springs, counter weights, dampning straps etc.

replace the jack or the circuit card with parts off ebay. see the two cards pictured in my solution at this link.
My ST2 just died Still picks up all the channels fine but just doesn...

Moving after 30 years takes a toll in unseen ways.
The clock is valuable for the memories, and it's loss can be symbolic of other losses. Nobody did this on purpose, and the young people hired to move stuff are never as careful as you would be. Years ago, I broke an antique bed we moved. The people said it was their grandmother's. I was inexperienced.

Five possible solutions:

1) Collect from the mover's insurance to pay for repairs?

2) Sue for damages to pay for repairs?
Spend $75-100 and file for damages in small claims court.
Except you don't know which mover caused the problem. Probably the first mover, but who knows?
Gather all the evidence you can, and assume the plaintiff will not show up in court.
Let's say you win the judgement.
Then you might have to hire a lawyer to try collecting the judgement.
People don't have to pay a judgement, unless you get a court order, which takes a lawyer.

3) Contact local clock repair and restoration company. The damage might be easily repaired once all is considered.

4) Do-it-yourself repair advice is abundant by searching 'grandfather clock repair'

5) Forgive and forget, and then buy another clock to replace the broken one.

Hi,
There are two layers in front screen, check both layers are damaged or not.
Part numbers are as follows:
321007211 ... PLATE (E46L), DIFFUSION (KDF-46E3000 ONLY) [front layer] price is $148
321007311 ... PLATE (E46F), DIFFUSION (KDF-46E3000 ONLY) price is $128
Available in Sony Part Store, put part number in search box, hit enter to get result.
Yes, average handy person can replace it, need to take off front screen frame by removing screws at rear sides of tv.
Hope these info will help you.
Thanks.

I would contact the factory and see if they have replacement part available. Try their website and ask. Most large retail manufactures have parts avaiable.
http://giottos.com/

depends on the model did you remove the shipping blocks or straps?? Plz post model number