Clock won't go from am to pm

On that type of clock, (I have similar), you just move the hours forward 12 hours. There is an indicator that shows AM and PM. You will see it change as you scroll past 12:00.

I did mine this morning.

https://www.google.com/search?q=change+from+am+to+pm+on+my+TIMELINK+ALARM+clock

..

Is it just not recording on a 24 hour basis? The set up on all of them start at midnight. If you want it to start say 8am just block out midnight to 12 to 7:55 for example. If it is in 24 hour format that 1 pm will be 1300 2 will be 1400....etc. Let me know if you have more probs and I will help you out.

Switch button on bottom of clock from 24 to 12. Military time uses a 24 hour clock which means 1:00 PM becomes 1300. This doesn't answer "AM" as there is no am or pm for military time.

reset the time an hour forward or back as the case may be. Clocks are all either 12 hour time or 24 hour time( ie1 am or pm or 0100 or 1300 hrs)

When you are setting the alarm on the wacky wake-up timex alarm, if you keep pressing FWD, you will see a small PM in the bottom right hand corner. When the PM sign is gone, you will now that it is set to AM.

Travel alarm clocks can have varying instructions, depending on the type of clock you are using. Here are some tips for use that will apply to any alarm clock.

1. Power source
   • Travel alarm clocks will need to have some sort of power source. Depending on the type of alarm clock, it might be battery-powered or it might have a cord that needs to be plugged in. Battery-powered alarm clocks can take mini watch batteries, AAA batteries or sometimes AA batteries. Travel alarm clocks, because of their tiny size, usually have the small batteries that need to be bought from a watch store or a dollar store. Before you leave, make sure you have a working power source and can turn it on.
     
   Changing the time
   • After you reach your final destination, power the alarm clock on. Now you'll need to set the time and date correctly. Check a watch, cell phone or television to get the exact time and locate the buttons or dials on your alarm clock. On some, there will be a "time" or an "hour" button you need to press and hold to activate the alarm time change. While you are holding it down, turn the dial, press the hour button or press the (+) button until you notice a time change. On others, simply pressing the hour or minute button will let you change the time shown.
     
   Setting AM/PM
   • The AM/PM option is critical in setting your alarm clock correctly. Make sure the LCD display on your clock has a light beside the correct AM or PM setting, or look for the letters AM or PM on the display. If you get this wrong, the alarm won't go off in the morning!
     
   Setting alarm time
   • To set the alarm time, look for a button or a switch that says alarm. If there is a switch, move it to the alarm setting. If it is a button, you'll need to hold it down until the time starts flashing, signaling time to change the hours and minutes to the desired alarm time, or hold it down while you press the hours and minutes buttons to reach the alarm time you want.
     
   Turn alarm on
   • Now double-check that your regular and alarm times are correct by switching the switch back and forth again, or by pressing the alarm/time buttons long enough to read the time set. There should be a picture of a bell somewhere on your LCD display showing that the alarm is set to "on." If there isn't, look for the on/off alarm button and move it to the correct position.
     
   Music options
   • The last step is finding the alarm wake-up option. Not all travel alarm clocks have this option, but if yours does there will be a switch or button that lets you choose to wake up by a buzzer, the radio, a CD, or another device.
     

Read more: Travel Alarm Clock Instructions ' eHow.com http://www.ehow.com/way_5250617_travel-alarm-clock-instructions.html#ixzz1YfneKhGw

I believe it is possibility #2.

Gary

When you click on the clock icon the clock setting menu comes up scroll down to the bottom of the list if it is available it is two lines below the options on screen and change it to am\pm press return go back up the list and click option to set clock set clock press back /return then exit

Hi,

1. Open the start menu.
2. Click Run (Windows XP only).
3. Type cmd and press enter/return.
4. Type in the word time (Without pressing enter).
5. Type a space and enter the time you want to change to in the format HH:MM:SS AM/PM. :MM:SS AM/PM. e.g. time 5:34:00 PM, time 12:15:00 AM, etc.
6. Press enter/return.
7. Type in the word date (Without pressing enter).
8. Type a space and enter the time you want to change to in the format MM/DD/YYYY. e.g.date 5/15/2009, date 2/14/1999, etc.
9. Press enter/return.
10. Check the clock in the bottom-right hand corner. The time should be successfully changed.

Take care

Depending on the brand, if you push the clock button more than once it changes from am to pm to military time (24 hour) to am, to pm, etc.