Question about Optoma EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector
My projector will turn on, the lamp kicks on and then kicks back off. The fan runs but no picture will come out
Projector is blinking and no picture,?
Posted on Jun 24, 2009
One gentleman said he found a Capacitor on the power supply board that had a bubble on it's side. He replaced the capacitor and the problem went away
Posted on Aug 28, 2008
923 views
Usually answered in minutes!
I have the same exact problem.
My projector powers on fine, and the standby light turns green. The lamp powers on for about 2 seconds, then it shuts off. After another 2 seconds, the "lamp" led blinks red once, then the projector goes into standby mode, and the fan turns on.
Exact same issue here. Optoma tech support says it is probably the lamp but I've only logged 20 hours or so on the projector so I find that difficult to believe.
Exactly the same problem...turn on then turn's off and it has a new lamp in it
Ditto. I turn on the projector and the lamp light signals red for one blink and then the projector fan turns off. I spent $300 and replaced the lamp and the same thing happens! I never got a lamp warning the first time.
So frustrating!
On my EP719
1. Power on
2. Optoma logo shows on screen and component connections begin
3. Red "LAMP" light shows solid
4. Goes into standby mode
Thus far I have not found Optoma customer services or technical people to be helpful.
I purchased a new replacement lamp and am having the exact same problems.
Does this mean both my lamps are in fact perfectly ok?
I would also like to know exactly what the fault is with the projector and whether it is cost effective to repair it?. Please and thanks.
I do have the same problem with Optoma EZPro 719.
The projector will turn on, the lamp kicks on and then kicks back off.
The fan runs but no picture will come out.
The red "Lamp" led is on.
The lamp had less than 60 hours on it.
I perchased new lamp.
Replacing lamp didn't fix the problem.
exact same issue, this is only the 2nd time I've used this projector. Lamp kicks on for 2-3 seconds, fan runs then shuts down.
Powers up then light goes out 10 to 15 sec. later lamp light blinks and then go in standby mode.I bought a new lamp same thing happens.Does anybody have a fix?
Same here!!! What do we do???
I have ep719, have same problem, of not lamp and fan issue, it shut off, no picture. replaced lamp, but still noot working, I wonder EP719 has defected power board issue. I think it is manufacturer' defect.
PROBLEM:
I have an Optoma EP719. I press POWER / STANDBY and instantly, we have a GREEN POWER LED. Then, 12 seconds later, we have a RED LAMP LED and a GREEN POWER LED. Quickly, the RED LAMP LED dissapears, but the GREEN POWER LED remains. Then, 45 seconds later, we have a BLINKING GREEN POWER LED. What happened?
TRACKBACK:
We just changed the lamp.
same problem here , any one found solution.
×