Question about Toshiba 56H80 56" Rear Projection Television

Wavy colors do not line up

My 56h80 toshiba looks like it is in 3 D .it started doing this in the 7 3 aspect but then it now does it in the 16 9 theater wide setting as well . A repair shop came out and installed a new convergence control board but it did not fix it. The picture in picture function quit working at the same time. When you look into the projection guns they all have a wavy vertical border the horizotal borders are straight. this seems to show up on the screen as wavy colors interlaced with each other. you can move the guns around with the convergence control on the remote but they will not line up since the picture being projected is not square.

Anonymous Sep 07, 2008

the blue coler is over the line the blue coler is over the line

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
4,402 Answers

Http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

http://www.eserviceinfo.com/

Posted on Dec 05, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How do i calculate a ratio

Ratios can not be calculate.

Read full answer

Aug 21, 2014 • Panasonic TC-P42X3 VIERA 42 Class 41.6...

0helpful

1answer

How do I get rid of the black border on the display of my Dell 5720 laptop Windows 7

Its because the display drivers are not installed, try installing display drivers

Read full answer

May 30, 2014 • Dell Latitude D600 Notebook

1helpful

1answer

My toshiba 40e210u lcd tv won't show full image on screen

The Aspect ratio of the TV could be on the wrong setting for the image you are trying to view. Widescreen's standard ratio is 16:9 ensure the TV is not set to zoom, 4:3, or pan & scan in the picture menu of your TV.

If the picture looks normal except it's just missing the edges or looks squashed or looks like it is zoomed in from the normal image then aspect ratio is probably the cause.

Read full answer

Aug 03, 2012 • Toshiba 40E210U 40 in. LCD TV

0helpful

1answer

Sound no picture 56h80 toshiba

This set will blank the picture for several different reasons:

No filament voltage to the three tubes it uses.

No high voltage to the three tubes it uses.

No vertical or horizontal sweep (prevents all three tubes from having the screens burnt with a line.

Some of these can be tested but most require a schematic etc.

Set has several fuses and some do not look like fuses--called pico fuses.

Read full answer

Jun 11, 2012 • Toshiba Televison & Video

0helpful

1answer

I have a Toshiba 52HM84 and the picture has gotten really wavy, what can I do?

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms

Screen Looks 3-D
Colors wont align
Screen may look distorted or warped
No Audio/Video - makes a chirping sound.

Problem #2

Another common problem is dull or washed out video.
Your TV

may have one or more of the following symptoms....

Dull looking picture
White looking picture
Halos around objects
Red/Orange looking picture

You can see some more examples and find a fix here

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Read full answer

Apr 06, 2010 • Toshiba TheaterWide 52HM84 52" Rear...

1helpful

1answer

My Toshiba 50H82 television takes about 30 minutes to clear up and during that process, it shakes.It becomes clear but still has wavy lines at the top of the screen which is about 6 inches.

Projection TV sets have two very common problems listed below.

Problem #1) Convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Read full answer

Jan 10, 2010 • Toshiba 50H82 50" Rear Projection...

2helpful

3answers

Toshiba rear screen projection tv theaterview colors wavey? It no longer is visible, the colors are separated

1.) It sounds like you have a convergence problem; in the customer menu with the original Toshiba remote select convergence--if blue or red will NOT move in some direction you have a bad convergence IC.

2.) This set uses 2 STK-392-110 convergence chips; they and any open resistors around them need to be replaced and the set adjusted.

3.) If you are able to do this repair yourself you can save a lot of money--Most TV shops will charge 300-400 for this type of repair on this set.

4.) If you cannot do the repair yourself look in your area--now is the slow time of year for TV repair shops---if they say it "has to go to shop" keep looking----almost any good tech can do this repair in your home in about an hour--I have done hundreds of them here and charge 200-250 total depending on brand and model.

5.) I am here to help people and if you have questions or need advice let me know--the two chips this set uses you can buy on Ebay for about 12 dollars plus shipping.

I do this here for free, so if this information has helped you give me a vote here---let me know by replying here if you need more help.

REGARDS SD TECH

Read full answer

Sep 14, 2009 • Toshiba 50H82 50" Rear Projection...

0helpful

1answer

I JUST BOUGHT A TOSHIBA MODEL NUMBER 56H80 AND IT HAS E GOING FROM BOTTOM TO TOP NONSTOP AND THE COLOR ISN'T LINED UP.

check that the lamps are screwed in properly and reset the tv

regards

Read full answer

Nov 26, 2008 • Toshiba 65H80 65" Rear Projection...

0helpful

1answer

Toshiba 50H82 Wavy Lines - Jittery Picture.

Dont have the manual - sorry - but this is the most likely cause.

Projection TV sets have two very common problems listed below.

Problem #1) Convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Read full answer

Nov 11, 2008 • Toshiba 50H82 50" Rear Projection...

2helpful

3answers

Toshiba 42WH36P rear projection TV has wavy lines

the problem is going to be a bad NEXT HYPER UNIT module. this is the digital scan card in the tv. try using the componenet inputs and if the tv works ok then you know that the HYPER UNIT is the problem. the reapir process for a "do-it-yourselfer" is too involved and would recommend a serivce center for this repair.

Read full answer

Dec 29, 2007 • Toshiba 42H83 42" Rear Projection...

Not finding what you are looking for?

View Most Popular

56H80 56" Rear Projection Television

Televison & Video

How do i calculate a ratio

Panasonic TC-P42X3 VIERA 42 Class 41.6 Diagonal X3 Series Plasma, Aspect Ratio 16:9, Native Resolution Number of Pixels 786432 1024 x 768, Moving Picture Resolution 720 lines or more, Shades of Gradation 6144 equivalent, 24p Playback 2:3, Deep Color, x.v.Color