Lands Phones Logo

Question about Radio Shack 3825 Answering Machine

1 Answer

Radio shack 43-3829 answering machine

I just hooked up my 43-3829 answering machine. when i leave a "test" message, the answering machine tells me i have no new messages.

help!

Posted by atdunew3 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Well, your machine might be broken, or you haven't set the little switch on the unit to ANS. The switch is on the side of the machine where the cables come out. But here are the instructions from the manual:

Recording Outgoing Messages:

Your answering machine has a built-in outgoing message, "Hello, please leave a message after the tone." You can use this message or record your own.

1. Hold the ANNC/DAY/<<, and speak clearly into the microphone, no more than 10 inches away.

2. Release the ANNC/DAY/<< when you finish. Your answering machine beeps and automatically plays back your recorded message.

*Your outgoing message must be between one and 60 seconds.

*If you record your won message but wish to revert to the pre-recorded message, press DELETE during playback of your outgoing message.

Posted on Nov 20, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I just bought a Radio Shack 43-3829 telephone answering machine. What does a caller need to do to send a message to a specific mail box? Right now all messages are going to the general mail box.

To put the message in a specific mail box, the caller needs to press *1, *2 or *3 (touch tone phone) before leaving their message. (Of course the answering system has to pick up before the key stroke.) Obviously the number corresponds to the mail box that will get the message.

So if you want to include these directions in your outgoing message, you would need to add something like "To leave a message for John press Star 1, for Sam press Star 2" when you record the ogm.

The manual for the answering system is available from Radio Shack. See http://www.radioshack.com/product/index.jsp?productId=2257360#tabsetBasic . The direct link to the English version of the manual is http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/4303829_PM_EN.pdf .

I hope this helps.

Cindy Wells
0helpful
1answer

Hi there, Is there a way to record your own message for the answering machine msg instead of that guys voice that says "Please leave a message".? THanks, Sarah

The instructions for recording the outgoing message are on page 10 of the manual at
http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/4303808_PM_EN.pdf
0helpful
1answer

How to record an outgoing message on Radio Shack answering machine, cat. no. 43-3825, serial number 40318384.

Hi, to record an outgoing message:

- Press and hold the ANNC/DAY/<< button. - While you're holding it down, say your outgoing message. - Let go of the ANNC/DAY/<< button to end the recording when you're done.
Your message can be up to 1 minute long.
0helpful
1answer

We have a Radio Shack digital answering machine and it says Lo. What does that mean? Also, how can you delete messages from another location? Thank you, [email protected]

"LO" in the display means the backup battery is low or not installed. For instructions on remote access and other operation, you can download the manual here from Radio Shack. Thanks for using Fixya!
0helpful
1answer

Callers cannot leave a message when I am on the phone.

caller id does not work when you are on the phone. You have to have teh line open, caller ID is only one line and only allows you to switch back and forth, the answering machine is not hearing teh call only you are.
0helpful
1answer

Can i retrieve a deleted message from a radio shack answering machine?

Full remote operation means you can retrieve, delete and save messages or change announcements from any touch-tone phone. just press the full remote option and check out for the  deleted message in it.it will show up if it still saved in memory.
11helpful
1answer

Greeting message

To Record Outgoing Message on Radio Shack’s Answering Machine [Model 43-3829]:

Press and Hold the ANNC/DAY/<< button. You’ll hear a beep; continue to hold down the ANNC/DAY/<< button and record your message. When recording of your [outgoing] message is complete, release the ANNC/DAY/<< button. Your message will automatically play back for you.

Please let me know if you have additional questions. Thanks!

Take care,
Gail :-)
Not finding what you are looking for?

Open Questions:

See all Radio Shack 3825 Answering Machine Questions

1,695 views

Ask a Question

Usually answered in minutes!

Top Radio Shack Lands Phones Experts

Cindy Wells

Level 3 Expert

6556 Answers

Muzahura Frank

Level 3 Expert

2071 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

53432 Answers

Are you a Radio Shack Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...