Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

Question about Sony KP-51HW40 51" Rear Projection Television

1 Answer

Sony kp-s4613/2 hie I dont seem to find any info on your site on the sony kp-s4613/2, im assume the kp-51 might be close. my sony shows a clear picture for 3 or so minutes then becomes wavey with what appears to be a picture moving diagonally fast to the right the switches itself off, then on again at times! a series of on/off sequences seem to reset it. before it gets wavey the picture starts to blank out while the two red leds in the front alternate on/off then switches off. please help alex

Posted by alex dennis on

  • dhruv_varma Mar 23, 2008

    my tv just constantly switches on and off and at times starts with no picture, the two led's keep flashing alternately and it doesn't run fine until the two led's are constantly on. any tips on what i should do i checked the power supply it seems to be fine.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Sir,
We have solve this problem by resoldering the power supply and vertical section.In few cases we have seen mains filter capacitor in power supply also defective.

Posted on Dec 17, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have 3 overlaid pictures and a curved picture-I don't know how to get the picture clear and normal

Try pressing the Flash focus button on the TV to adjust the convergence and check if it helps.
3helpful
1answer

Sony kp-51ws520 when turned on just has standby light flashing . the rest is all dead, no picture or voice.

Standby flashing light shows that tv got some internal problem. How many times standby light is flashing is info that provide info about what section of tv got problem.
Count standby light blinks and let me know, there would be 3 seconds long pause in blinks so count pause to pause.

1helpful
2answers

I need part # for Sony KP-51ws500 D board, and

Hi,
Required D board part number for KP-51WS500 is appended below:
A1300417A... D COMPLETE BOARD
Available in Part Store, click the link for price info.
Thanks.
0helpful
1answer

Aproximately 50% of the Tv's image is distorted by a green and red doubled image. Can we fix this

Yes, this problem can be fixed if you are handy with electronics stuff repair and can solder parts in circuit board easily with proper tools.
Replace convergence out ICs to get converge picture.
Let me know exact model number and brand of your TV for further info as question shows its Sony KP-51HW40 tv.

2helpful
1answer

51" sony projection with distorted pic and color

The convergence amplifiers are likely blown.
Fairly easy fix if you are good at soldering.
Search this site for convergence repair.
Dan
0helpful
1answer

The picture is out of foucus

If your tv is Sony KP-51WS500, then its rear projection tv and problem seems in convergence stage.
Please confirm model number to guide you further.

0helpful
1answer

Picture with red 3-D effect

IC8001, STK392-560 seems defective, its convergence output IC.
0helpful
1answer

Sony KP-51WS510 51 in. Dark Picture

These sets have been known to have loose welds in the picture tubes. Most likely your tubes are showing this problem.
Not finding what you are looking for?

714 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76835 Answers

Ekse

Level 3 Expert

13435 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

252 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...