I am getting the following message "Check Min. Springs" what does that mean

Could be a slow drain time issue. Excess wear makes it drain slow.

I've found that re-registering the dlls has solved quite a lot of windows update issues. have you tried this?
see method 5 here:

http://support.microsoft.com/kb/326253

check oil level srart for2 seconds disconect the -- earth of your battery let for 15 min conect then start after 10 min.

Hello & Welcome to FixYa

F35 error means that there is some sort of issue with the steamer electronic board and analog pressure sensor has gone bad. Check that the hose is firmly attached with the washer and is not blocked. You can also check the water level pressure switch operation. Please get back to me if you have any other questions.

Kevin

Hi nickweekes36,

Please check my following tip for the full solution to your problem.

Click here -> L.G E1 Error / Whistling Sound

Kind Regards :-)

* If you found this solution helpful, please rate it.

Many times, lights will not turn off until a dealership turns them off. There may not a problem with the suspension anymore, but the light will stay on until the light turns off.

It sounds as if it is not picking up the paper from the tray. It might need new feed rollers. Another thing to check is the lift arms on both sides of the tray. Make sure the springs are still attached to them. There is also a little switch on the left side front of the tray that adjusts the bottom plate pressure. You can try adjusting that to see if it helps.

Hi.

The machine is in lock mode.

Try following the indications here: The following procedure works when you get the ventilate error: The Ventilate sign can....

Regards.

Ginko

unplug battery for few min. plug back in.

Please check the steps under the following link:

http://www.howtogeek.com/howto/windows-vista/fixing-bootmgr-is-missing-error-while-trying-to-boot-windows-vista/