Windows not Start successfully

HI Dear Sister / Brother,

please help me to fix the problem where i unable to start window successfully and even cannot load to login page. I tried by make changes to the bios settings but still fail to load windows successfully.

Please view the video sequencely so that you can get clear picture what the exact problem that i face. Please help to solve the issue and your help highly appreciated. Thanks.

laptop model: M-Life Hyundai

http://malaysia.video.yahoo.com/watch/3874476/10561002 === video 1
http://malaysia.video.yahoo.com/watch/3874514/10561143 === video 2
http://malaysia.video.yahoo.com/watch/3874586/10561299 === video 3

Please email me to [email protected]
the solutions or suggestions.

1 Answer

sandip panchal

Master 535 Answers
Posted on Nov 09, 2008

sandip panchal

Master

Joined: Feb 16, 2008

Answers

535

Questions

Helped

173275

Points

1506

Ur windows filels has been corrpated becose of that ur pc has been not load it if u have a imporatat data in your laptop then u need a live cd of xp to copy your data in your pandarive or usb hard disk then aafter u have to fromat it & reinstall your windows xp

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Cannot open programs in control panel. 4 days premium techs have been working on the issue, no success. Can control panel be uninstalled and reinstalled?

Hi!

Sadly, the Control Panel cannot be removed and then re-installed. Typically I see this issue if Windows is not genuine or hasn't passed activation.

If you go into Start > then type in sysdm.cpl (provided your system is Windows 7), this should get you into the System section of your Control Panel. Near the bottom of this window, does it say Windows is activated?

I've provided a list of accessing all the applets inside of the control panel for your reference, below (again, assuming you're running Windows 7):

http://support.microsoft.com/kb/192806

Hope this helps!

Read full answer

Mar 01, 2015 • Computers & Internet

0helpful

2answers

My brother printer has an error unable to clean 50

If you facing Brother Printer In Error State Windows 10 check this Answer.

Brother Printer In Error State Windows 10 is a failure normally displayed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not connected properly, etc.

It is informed that customers usually face the Brother printer in the error state. There can be various circumstances liable for this problem. The obvious factors include outdated printer drivers, incorrect printer settings, certain technical difficulties within the print spooler service.

There are some method that fixes Brother Printer In Error State Windows 10 Easily check here:-

Method 1: Reset the Printer Settings.

Method 2: Ensure that the Brother Printer is Online.

Method 3: Set the Print Spooler Service as Automatic.

Method 4: Install Windows Pending Updates.

Method 5: Update the Printer Driver.

Full Blog- Brother Printer In Error State Windows 10

Read full answer

Sep 28, 2012 • Brother LC51BK Print cartridge, Inkjet...

0helpful

1answer

I got a laptop from my sister and she cant remember the password to it. I have downloaded windows xp recovery but idont know how to operate it when i install the disc. what do i do from there

Turn the laptop off then turn it on and immediately start hitting the F8 key repeatedly. When you see the option of SAFE MODE select it. Let the computer boot all the way up to safe mode and when successful you will see the login user accounts for Administrator and the one which you sister forgot the password. Select the Administrator account and pray that she did not password protect it and forgot it also. If you successfully get into windows with the Administrator account do the following. Click Start/Control Panel/User Accounts. When the user accounts come up select your sister's user account then look for the option to Remove the Password. Remove the password then reboot your laptop.

Read full answer

Mar 14, 2012 • Dell XPS Computers & Internet

3helpful

1answer

My printer Brother MFC-9440CN is unable to print. The message showed on display as"Print unable 28, See troubleshooting and Routine maintenance chapter in User's guide". I have cleaned the...

Hi there !

I am here to help you to solve your problem.

I believe your print spooler service stop running or your spooler is confused pending some queue at the print spooler service.

To resolve this, follow this procedures.

Go to START MENU
Choose RUN (For Windows XP) or Choose Commamd prompt, right click mouse and run as administrator ( For Window vista and windows 7)
Type the letter "cmd"
Type the word "net stop spooler"
Exit
Go to C: drive
Choose to Windows Folder
Click show content
Choose system32 folder
Choose spool folder
Choose printer
And delete all printing jobs pending
Again go back to CMD window and type the word "net start spooler"
Restart your computer and must also turn off your printer and then switch it on.

It will work fine right now
I hope it helps you

Read full answer

Jan 27, 2011 • Brother MFC-9440CN Laser Printer

0helpful

5answers

Why does my Brother printer goes into Sleep mode and I can't print??

I have copied in the illustrated instructions for resolving printer status is Offline or Paused. (For Windows®) but if distorted please view here.

The printer status is Offline or Paused. (For Windows®)
Description: To solve the problem, please see the following:

If the printer status is Offline:

Check that the printer is online using the following steps:

VERIFY THE BROTHER MACHINE IS POWERD ON AND THERE ARE NO ERRORS
1. If the LCD screen is blank, then the Brother machine is not powerd on the machine to see if it wakes from sleep mode. If it does not, then verify that it is plugged into a working outlet and any power switches are turned to the ON position.
2. Check the LCD screen for any error messages. An example would be "Paper Jam" or Ink/Toner Empty". If the LCD screen shows an error troubleshoot to clear the isssue indicated.
CHECK THE PRINTER STATUS

NOTE : These steps or screens may differ depending on the operating system.
1. For Windows® XP Users:
  Click Start => Printers and Faxes
  
  For Windows Vista® Users:
  Click Start => Control Panel => Hardware and Sound => Printers
  
  For Windows® 7 Users:
  Click Start => Devices and Printers
2. For Windows® XP and Windows Vista® Users:
  Right click on the icon for your Brother machine and choose Use Printer Online.
  
  For Windows® 7 Users:
  Double click on the icon for your Brother machine => See what's printing => Printer => Use Printer Offline (Take the checkmark off.)

Note If the problem still continues, do one of the following:

If you find the Related FAQ's at the end of the page, click it and check another solution.
If you don't find the Related FAQ's, please contact Brother Customer Service from "Contact Us".

If the printer status is Paused:

For Windows® XP and Windows Vista® Users:
Right click on the icon for your Brother machine and choose Resume Printing. (If the menu reads Pause Printing, there is no problem in the printer status.)

For Windows® 7 Users:
Double click on the icon for your Brother machine => See what's printing => Printer => Pause Printing (Take the checkmark off.)

If this does not solve the problem,

For Windows® XP and Windows Vista® Users:
Double click on the icon for your Brother machine and choose Printer => Cancel All Documents.

For Windows® 7 Users:
Double click on the icon for your Brother machine => See what's printing => Printer => Cancel All Documents

If you are using Windows Vista or Windows 7 please view here.

Trust this is helpful.

Read full answer

Dec 17, 2010 • Brother MFC 7840W Printer

0helpful

1answer

I HAVE TO START MY COMPUTER LAST GOOD CONFIGURATION. WINDOWS DO NOT START NORMALLY. THERE IS A AUTOMATIC CHECKING OF DISKS IF WINDOWS START IN NORMAL MODE ,HOWEVER AFTER COMPLETION EVEN THOUGH DISK CLEAN...

Hi,

If this happened after installing IE8, I would suggest you try and start the computer in safe mode and then uninstall. Go to C:\WINDOWS\ie8\spuninst and double click on spuninst.exe (picture of a computer). This will revert the system back to the previous version of Internet Explorer.

Restart the pc and see if it loads back into windows OK

If this does not fix the issue, go back into safe mode, click on start, run, msconfig. Click on system restore and follow the instructions. This will take you back to a previous point in time so make sure you choose a time when the pc was working.

If you are unable to get into safe mode or the above still does not work, then there may be a corruption in Windows. You would need to think about repairing windows or recovering windows back to the way it was when you bought it with your recovery discs or a Windows XP CD

Hope that helps

Read full answer

Nov 10, 2010 • Microsoft Windows XP Professional

0helpful

2answers

Print unable 7

Hi,

If i am able to understand your problem, you are using Windows 7 PC and you are not able to print from PC to Printer

If so,

Click on Start Button
Click on Control panel ( a Control panel windows opens )
Click on Printers
From the Printers Page Right click on the Brother Printer Icon
Left click on Troubleshoot
You will find a new window - Continue with the Next button and complete the instructions

Close the window and try to print it should work.

Read full answer

Nov 02, 2010 • Brother MFC295CNAll-In-One InkJet Printer

0helpful

1answer

UNABLE TO INSTALL SP2 ON XP OP.SYSTEM

Hi there,

Try the following steps to install the update successfully.
Stop the services pertaining to Windows Update.
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2. If you receive a notification from User Account Control simply click Continue.
3. At the command prompt, type the following commands and then press ENTER after each command.
net stop wuauserv
net stop bits
net stop cryptsvc
4. Please do not close the Command Prompt window.

Rename folders pertaining to Windows Update
At the command prompt, type the following commands and then press Enter after each command:
ren %systemroot%\System32\Catroot2 Catroot2.old
ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

Start services pertaining to Windows Update.
net start wuauserv
net start bits
net start cryptsvc
Close the Command Prompt window.

Regards,

Om

Read full answer

Oct 01, 2009 • Microsoft Windows Xp Home Edition Sp2...

1helpful

2answers

Unable to print 50

simple driver configuration problem linux is (the Cups printing system) is pretty universal just get your settings right or even cr even surrogate settings it should work

Read full answer

Nov 27, 2008 • Brother MFC-440CN InkJet Printer

0helpful

1answer

Window not start successfully

This issue is related to some program that was installed on your computer or some hardware issue.
On the black screen select SAFE MODE

Then check there the possible issues.
Uninstall the last program
Be sure the computer is not virus or spyware infected.

Then restart on normal mode.

If the problem still there, you will have to

insert your windows XP CD and run a recovery console to fix that.
During the installation select (R)

Read full answer

Nov 06, 2008 • Computers & Internet

Not finding what you are looking for?

View Most Popular

Computers & Internet

Cannot open programs in control panel. 4 days premium techs have been working on the issue, no success. Can control panel be uninstalled and reinstalled?

Computers & Internet

160 views

Ask a Question

Usually answered in minutes!

Check Out the Mobile Browsers Report

View all Fixya Reports

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Related Topics:

Windows not Start successfully