Question about RTO Esab Power Cut 1250 Plasma W/Pt 32EH Torch 0558001933

Open Question

Get the fault light on my esab 1250

Push trigger the air start to blow.then then fault light starts to flash.check pwr.ground, air, put new tip an elerco, in still flashs fault.

Posted by Anonymous on


1 Related Answer


  • 194 Answers

SOURCE: It does not work it just flashes the fault bulb

when mine act like that I check the tip make sure the air pressure is right and that it has a good ground

Posted on Feb 10, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the code if a 1990 ford airbag light code 10

The code 10 for srs (air bags) is the thermal fuse inside the
diagnostic monitor is blown, it will do this if vehicle was in an accident,airbags were deployed and crash sensors trigger, safing sensors were also triggered or if the circuit to the monitor was at one point shorted to ground blowing fuse.a code 10 is just telling you the monitor thermal fuse is no good snd you must replace module. But if vehicle was not in an accident and you had a different code flashing at some point, usually a code 5 showing a hard fault short,or if it's flashing that now, this MUST be repaired BEFORE the new monitor is put in or you will ruin new monitor, and there not cheap.

Jun 12, 2014 | 1995 Lincoln Town Car

1 Answer

The gas light come on and flashes and wont cut. I have changed all the nozzels on the torch and still nothing?


Gas light goes on when you have an air flow or pressure problem. Do you have enough pressure? you will need at least 120 psi at the compressor and 75psi at the plasma machine. Do you have enough flow? You will need 20 SCFH and a 30 gallon compressor reserve tank.

Let me know if this help. Please vote.

Jul 30, 2011 | RTO Esab Power Cut 1250 Plasma W/Pt 32EH...

1 Answer

Is the esab 1250 worth buying and how much should i buy it for

Esab's plasmas and machines are the best for manufacturing and shop maintenance. Are made for the tough jobs. Retail price brand new price is around 3200.00 US dollars.Cutting wise is a high speed cutting machine and will cut up to 1-1/2".

Mar 07, 2011 | RTO Esab Power Cut 1250 Plasma W/Pt 32EH...

1 Answer

Interior lights fuse blows as soon as you put in a new one

one of your pwr wires going to ground check and insulate all wiring(maybe rubbed through on metal behind light cover/dash cluster

Jun 06, 2010 | 2004 Buick Rendezvous

1 Answer

My plasma cutter just flashes fault everytime you try and use it. could it be the ground or would it be the electrod

check the main lead to the torch,if there is a cut or any hole in the rubber coating it will show fault,the unit uses high frequencey so if the lead has a cut it wont fire up.

Jan 22, 2010 | RTO Esab Plasma Electrode 0558001969 PKG/2

1 Answer

2002 Ford Ranger Edge Regular cab

check for a problem neutral switch and wires
may find that switch is loose and grounding out the wire connections or plug

May 04, 2017 | 2002 Ford Ranger Regular Cab

Not finding what you are looking for?
RTO Esab Power Cut 1250 Plasma W/Pt 32EH Torch 0558001933 Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Welding Tools Experts

Brad Brown

Level 3 Expert

18520 Answers

Bill Boyd

Level 3 Expert

53816 Answers

ray gallant

Level 3 Expert

70831 Answers

Are you a RTO Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides