- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i think your printer toner hasn't enough ink. i requesting to you please check your ink level and if you wanna the better result then change your printer toner. any way, it must be same brand never use the other brand or sacrifice. hope your success.
your copier e-studio 350 some time showing '' dispose used toner'' It dont mean you install new toner... its mean you dispose used toner box.. Dear open the copier frant cover
and dispose used toner white box...
The toner sensor where the cartridge is loaded is fouled or you refilled this cartridge and the printer does not reconise the toner inside and thinks its empty ether or sensor or refilled cartridge the printer thiks there is no toner.
1. Did you refill the toner?
2. Brand new cartridge > take it back to the retailer if that does not work the printer will need repair.
Please do leave positive feedback and ratings for your free answer today!!
I can help you with this. Follow these instructions-->
Start-->Control Panel-->Administrative Tools-->Computer Management, under the Storage section select "Disk management". Locate the external harddrive, and then change the drive letter. Select the external drive. Right click, and select "Change drive letters and paths"-->Highlight the driveletter to change-->Click the "Change" button-->From the drop-down list choose an unused drive letter, and hit Ok. The external drive should be recognized and accessible at this point.Let me know if you have any other questions. Thank You,Raph30
If you pull the cartridge out and look inside the are to Metal pins to the right hand side make sure niether are stuck. Also if you are using refilled or refurbished cartridge they may not have been filled with the proper type of toner and the magnets in the cartrisge may not be regonizing the toner.