I simply turned ON the progressive scan and now the screen is black and I can only hear the audio. I can't get back to the blue screen where I can display the menu options. Ultimately I am trying to play DVD+R's on this damn thing and I've been unsuccessful so far. My buddy at work burned them from limewire in MPEG format and they won't play on my dvd player. What do I need to do? When I insert the DVD+R it reads "no audio data" "no visual data". PLEASE HELP!!
With the remote: While in STOP mode, press the DISPLAY button. Use up/down buttons to select SETUP. Press Enter. Use up/down buttons to select CUSTOM.Press Enter. Use up/down buttons to select SCREEN SETUP. Press Enter. Use up/down buttons to select PROGRESSIVE. Press Enter. The manual is a bit indistinct after this, but I think the prompts will direct you. Just turn Progressive OFF.
Owner's Manual page 61, link http://www.sonystyle.com/wcsstore/SonyStyleStorefrontAssetStore/pdf/DVPNS57P.pdf
To turn off progressive scan mode, press 3, 6, 9 keys of remote while dvd player is in standby.
Regarding limewire mpeg stuff playback, media player in computer is best.
Thats not working for me. I just get diagonal bars on my TV screen when I connect from the green jack on Component video out to my TV..
Eureka! I did it! Now i share this with all good folks out there, for free. At the back of the dvd player u will find RGB component video out. With no disk on the plate, connect the yellow cable to the green jack out then to your Tv video input. Menu comes back on screen. Then simply put progrsv scan OFF. Bingo!
3,264 views
Usually answered in minutes!
and to get it to standby mode? turn it off? or leave it on and let it sit for a while?
I tried pressing 3, 6, 9 keys while on standby and no luck.
I've taken out all the cables and cords connected to the DVD player as well..
Any other solutions?
×