Bypass break wire boss bv9962 - Boss DVD-7500 Car DVD Player

888888888 Just fill the screen with all 8's

if you trying to view the dvd while driving you have to bypass the secruity feature. all you have to do is connect the wire that goes to the Emergency Break to the Ground Wire On The DVD player. I Have This Player And Have Done This.

Yes, you can bypass parking break feature by connecting the corresponding wire of BV8962 to ground, also you could add a 3 pin toggle switch to get a normal and bypass mode switch, this can be wired of this way, the common pin of toggle switch to your video unit, at the other pin, it could be connected the parking break wire (normal mode) and the remaining one to ground (bypass mode).

Connect the pink/black wire to ground to bypass.

You can ground it.

***DISCLAIMER*** The parking break switch in your in-car video player is a safety feature that is required by law, bypassing or disabling this switch is NOT recommended by any means. The answer I am providing is for informational purposes, neither fixya or myself are responsible for any consequences of the use of the information herein.
there are two ways to do this, there are marketed products designed to do this that come with a few parts and an instructional dvd. Or you may purchase simply a toggle switch, and some wire, and do the following.
There is a wire connected from the back of the dvd player deck to the parking break indicator bulb or wire on the dashboard (the light that comes on when your parking break is on). This wire can be disconnected from the parking break lamp and attached to a toggle switch, and then to a power source (12v+). With most manufacturers there is a "code" to enable video. Generally it's something to the effect "turn the parking break on for 1 second, off for one second, and then back on, and leave it on". Whatever the code is for your unit, you may now do the same with your switch to activate video.

GROUND THE PARKING BREAK LEAD.

i have heard that many of dvd players have an extra wire and instruction manual tell's to connect it to something relaited with parking break (then you hold parking breake it gets ground and completes circut so video starts) so you can connect it to and ground wire with a swich becouse of that you can simulate paking break :) hope it will help :) i have the same problem but just haven't got time to test this :) 

Boss Audio is the easiest in-dash DVD on the market to bypass; all you do is ground the ebrake wire. I recently installed 12 Boss Audio in-dash BV-7300's and did this to all of the decks problem solved. By the way I did this because they were in the back of limousines where the driver couldn't ever even see one of them while he was driving. I don't think there will be a problem, try it.