Question about Yahoo Diamond Vision DVDC803-04 DVD Player
I JUST INSTALLED A PERSONAL TV FROM ROGERS, WHICH I AM GETTING FOR FREE FOR ONE YEAR. PROBLEM IS I CANNOT VIEW MY DVD WHILE THE PERSONAL TV IS ON. I DO HAVE A DVD BUTTON ON THE PERSONAL TV REMOTE CONTROL, BUT I DO NOT HAVE YOUR BRAND NAME TO CODE THE DVD IN ORDER TO ACTIVATE THE DVD BUTTON ON THE PERSONAL TV. THE PERSONAL TV BOX IS A SCIENTIFIC ATLANTA EXPLORER 1840 CAN YOU HELP ME WITH THIS THANKS! SOFIA KHRYSTYNE LAVICTOIRE
SOURCE: code for universal remote
This must be a duplicate post. And because I'm not sure which one you'll check I'll just post the answer here too... Diamond vision is a little pickey with handing out their code access. And Rogers doesn't have a whole lot about accessing components like DVD players. But try this: 1. Turn on DVD player 2. Press the AUX button at the top of the remote 3. Press and hold the SETUP button until the LED light blinks twice. 4. Press 9-1-1 in sequence, the LED will blink twice again. 5.Aim the remote at the DVD player and slowly alternate pressing POWER and AUX. Stop when DVD turns off. 6. Press SETUP to lock the code in memory. It may take several minutes of alternating between POWER and AUX to find the appropriate code - be patient... If after ten minutes you haven't got it try programming it as a VCR - steps 1 through 6 above and substitute VCR for AUX.. Good Luck Bill
Posted on Jun 11, 2007
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: