Problems with hearing sound from bravia LCD tv through bravia DAV-HDX275 theatre system

make sure you have a nice clean cable signal. if it's fuzzy that may be causing the static. also, if you have a cable box, check the audio settings for it.

Make sure that you have the RC Cables (red and white) plugged into the audio ports that coincides with the component video inputs. If that wont work then try plugging the audio and video cables into the inputs for the satellite, since that works. That way you can isolate the issue. If it still wont work try using the XBOX 360 HDMI cable. That has both audio and video.

Like above, use an optical connection (need fiber optic cable) or a coaxial connection (single RCA cable). HDMI might also work, but I personally haven't checked. Connect the audio outs from the cable box to the audio ins on the home theater. The TV will only need a video connection from the cable box, as well as one from the home theater (for DVDs, onscreen menus).

This discussion can help you set up the universal remote.

Amongst 3 audio and 3 video options on DVD, use only one for displaying picture on TV and one for getting sound.
Yellow Wire is for picture.
Red Wire is for sound.
White Wire is for sound.

Connect Yellow from TV to yellow at DVD
Red from TV to Red at DVD
White from TV to White at DVD

Hope this help.....

hometheaterstore.com

It's likely the sound settings on one or more of your items are not set right or switched off.

Make sure the TV is set to output audio to the digital optical port. Then make sure you have selected the proper output mode on the home theatre. Unplug the optical cable from the back of the home theatre and see if the red laser is on (don't shine it in your eyes! :))

what exactly is the problem? no connections? or connected and cannot get it to work?

Here are a couple of the most common reasons for your problem:

Make sure you have selected the right input source on the DAV-HDX275 that your TV station source (cable, satellite, direct TV or whatever you get TV stations from) is connected to on the DAV-HDX275.

Also make sure that if you are using a digital input (HDMI, optical, or coaxial) from the TV station source, that the DAV-HDX275 in set for a digital input and on the right source.

If you are using an analog source (red and white RCA jacks) for the TV stations , make sure you do not have the digital input activated for that source on the DAV-HD275. You need to select the analog option.

You must also be sure that you have a cable, whether it is analog or digital, connected from the cable box to the DAV-HD275.

I hope this was helpful to you, it is always very important to double check all the connections and make sure the stereo is set to the right type of input (digital or analog).

If you have found this to be helpful, a good rating is always appreciated. Thanks and let me know if you need any more help.

Did you try to connect AUDIO OUT from your TV to AUDIO IN on your package?

You must run a Digital Optical cable from your PS3 to your reciever. Then press your function button on your recievers remote until you see SAT/CABLE on your recievers display. Next go to your PS3 settings and go to Sound settings, then Audio Output settings, and select Digital out (OPTICAL) then your done. This is the only way to get true digital sound from your PS3 to your reciever.