Doesn't turn on, but LED blinks 5 times

When you press the power button the TV will not turn on, but the LED will flash 5 times rest flash 5 times rest continually until you unplug the power cord from the wall. I tried to reset he the TV with the remote contol, but it still does he same thing.

11 more comments
baywyn Nov 11, 2007

my sony tv dosen't turn on but LED blinks 9 times
zo65 Nov 26, 2007

My sonny does the same thing and the led blinks 5 times.

is it worth to repair it or just get a new tv.

thanks for your help
Anonymous Nov 29, 2007

My neighbor's Sony FD Trinitron WEGA KV-32FS120 32" TV doesn't turn on and blinks 9 times at repeating intervals. Repairman needed to replace one of the circuit boards that failed. Seems like this has happened to many others and sometimes twice in a year.
ponchop Dec 02, 2007

flash code 5 vidio cycles in and out as led blinks code 5
Anonymous Dec 05, 2007

Yes Yes
rcomeaul Jan 09, 2008

This is the exact same problem with mine. Is there something I can do, or do I have to take it to a repair man?
Anonymous Feb 25, 2008

I have the same problem with my kv32f16. Helppppppppppp. Thanks Jim
seejlin Jun 11, 2008

I had the same problem. I got it on Sept/2004 and it die on Jan/2006. The standby light blinks for 5 times...repeat..No sound, no image. The customer service was the worst. Sony has the worst customer service. It provides lots of excuses for their manufacturing problem. What can I do it Sony can not help me fix this TV?
lkirkland Jul 19, 2008

Our TV will not turn on but it flashes 5 times and the rests and flashes another 3 times
sppre Nov 22, 2008

I am wondering how many of us have small children who tend to turn things on and off quickly. It seems different forums present the same issue about the "blinking" and "not turning on". Some have admitted to small fingers, others have remarked about "I used to repeatedly try and get it to work, now nothing". I tend to agree with the other Tech's advice -- sounds like the flyback transformer ($144 CAD) and / or associated transistor ($19 CAD). Likewise, you should have a qualified Tech to install it.
rustman91 Dec 02, 2008

im a liscensed auto tech and i have knowledge in printed cirtcuits and solid state electronics, is this something i can solder up, if so where should i look, if not what kinds of tests should i be doing and what kind of pieces should i be looking for? if all else fails what kind of repair bill am i looking at?
thnx
shelleee Jan 20, 2009

I have a Trinitron KV36HS420. We turn it on in the morning and it does not come on. Standby light flashes.. so far we have been able to get it to come back on. Is is going to die one day?

This sucks! TV is only 2 years old
theresatort Feb 14, 2009

TV blinks 7 times after trying to start it. Doesn't seem like there's an easy fix after reading several different sights. It's too heavy and not worth the effort of brining to a repair man. I'll pitch it out the 2nd story window and go buy a new LED VISIO.

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

The led light flashes 9 times what can i do

Posted on Jun 30, 2009

Anonymous

Ws-65511 no power up
problem

Posted on Jul 20, 2008

Anonymous

Don't buy Sony products...customer service was horrible. I got more information and help from this website than Sony

Posted on Jul 19, 2008

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
3,130 Answers

The flashing light is an indication of the sweep falure. Most of the time it is in the sweep output section, like the flyback transformer and or the horizontal output transistor. Most of the time it is the flyback that causes all the problems and componet blowouts in these sony TV sets, but it is also sometimes the vertical output IC that shorts out the sweep power supply. In any case a solid state set is no where to be experimenting around with and should only be worked on by a trained service tech. Good Luck

Posted on Oct 09, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a Sylvania TV with dvd/vhs attached and do not have the remote. I can't get the tv on channel 3 to watch cable. I have tried numerous universal remotes but none of them have worked. Please tell me...

Here is a process to program a Vizio Universal remote. I saved this info to my computer as a text file some time ago. Can't remember where from, so if it works, no credit to me. :-)

Sylvania:10054, 10030, 10171, 11944, 11931

1. Manually turn on the TV.

2. Press and release the TV button.

3. Press and hold the SET button until the LED blinks 2X.

4. Enter your Codes

If the code is accepted, the LED flashes twice after the last digit is entered.

If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed.

5. Point the remote control at the TV and press the POWER button. The TV will turn off.

Vizio Remote Reset

(Use this step if the LED doesn't blink twice after entering the above codes)

1. Press and release the TV button.

2. Press and hold the SET button until the LED blinks 2X.

3. Type 9-8-2, the LED should blink 4X.

4. Now follow the steps above for Programming the TV again.

Read full answer

Jul 07, 2014 • Televison & Video

0helpful

1answer

TV turns itself off, then on automaticlly

The fan should run for a few minutes after shut off to cool the lamp down.

If I read and understand correctly somewhere in the cycle you are getting 5 red blinks? that is an error code........

Either you or I can Google the model number of the set with 5 blinks.....or visit the Sony site to see what it means.....

Read full answer

Apr 24, 2012 • Sony KF-42WE620

0helpful

1answer

When I turn on the tv all i get is the welcome screen, and it will not go any futher,there is green light flashing in front of the tv. and it will not turn off with the remote, i have to unplug it.

Hi Andre,

May I know if the LED light at the front panel has a pattern of flashes or flashing continuously in green color.

Please check if you can access the "Self diagnostic screen" by following the steps below.
- To activate, press the front panel "Activity" and "Channel down" buttons at the same time and hold for 5 secs. The Status led will then flash a two digit code. Example, if the error code is "23" the led light flashes 2 times(blink, blink) pause and then flash 3 times(blink, blink, blink). Let me know the error code to narrow down, it will help to diagnose where the fault came from.
Note : the TV must be in shutdown not switched off, or AC power cord is removed because the code will reset to "12" means no error. Use the front panel buttons not on the remote control. If you can't access the self diagnostic, press and hold the "Activity" button on the front panel for 5 secs before entering the "self diagnostic" code.
Regards,
Jdvillanueva

Read full answer

Nov 24, 2011 • Mitsubishi WD-60737 TV

0helpful

1answer

I have the radion shack hdtv remote. Cat no

Download the manual and codes from here

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/radio_shack/15135-manual.zip&area=other

Here is how to set the code...

1. Turn TV on
2. Press TV button on remote
3. Hold P button on remote until LED blinks twice
4. Enter the first 5 digit code for Magnavox TV's
5. Press Power button - TV should turn off. If TV doesn't turn off repeat steps 2-5 with the next 5 digit code, until either TV goes off or run out of codes.
6. If out of codes use searching for code method below...

TV codes for Magnavox

10047, 11454, 10054, 10154, 10000, 10250, 10051, 10180, 10060, 10030, 10171, 10092, 10706, 11913, 11904, 11755, 10019, 11365, 11254, 10802, 10386, 10282, 10020, 10187, 10186, 10024, 10179, 10096

Searching for code

1. Turn on TV.
2. Press TV button on remote
3. Press and hold P button until LED blinks twice
4. Enter code 991 on remote - LED blinks twice
5. Press 1 - Device key blinks twice
6. Press Power button once
7. Press and release CH+ key until TV turns off.

At this point in the manual, the manual is only correct depending on what type of TV you have.

In the manual if you press the Power on button the TV should turn itself back on, the fail to state that not all TV's turn on by the power button, the majority now are triggered to turn on, on channel change, however you can't use channel change here to check it as you'll go to the next code... here is my solution...

8. Turn TV back on either using original TV remote, or buttons on front (most TV's if you change channels they come back out of standby mode, very few now turn on by pressing the power button).

9. Press Power button on remote - TV should turn itself off again.
10. Press P button on remote to lock in that code.

If the device does not turn off press CH- to go back through the codes, press and release P button when TV turns off.

Finding code

If you used the search function you might want to know what code it's using. To do this follow these instructions...

1. Press TV button
2. Press and hold P until LED blinks twice
3. Enter 990 and LED blinks twice
4. Press 1 and count number of times LED blinks this is the first digit of your code (e.g. 1 blink = 1, 2 blinks = 2, etc).
5. Repeat step 4 pressing buttons 2 - 5 for the other digits (e.g. for the second digit press 2 count number of blinks.. etc)

At this point the manual doesn't tell you how to get out of this mode, I presume pressing any other button on the remote other than 1-5 will take you out of this mode, either that or leaving the remote alone for 5 minutes.

Read full answer

Nov 08, 2009 • Radio Shack (15-2147) Remote Control

0helpful

2answers

I need the codes and procedure to program a one for all urc3220 to my Zeinth tv.

016,017,092,000,[COMBO--000,037] are the codes
for your Zenith TV. Follow these instructions
carefully. These are as close as i can get you
to getting you operations...the rest is up to
you. GOOD LUCK!

PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER the 3 digit code for your brand.
You should receive 2 quick flashes after entering your code.
PRESS the POWER button to test the code.

If you have tried all of the set-up codes for your brand of equipment, or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.

PRESS the button for device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER 9-9-1 (two blinks on the remote)
ALTERNATE slowly between the POWER key and the DEVICE(TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER)
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

Blinking Back the Code:

PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)

If the remote DOES NOT blink it means the number is 0.
This is your 3-digit setup code.

Read full answer

Sep 04, 2009 • Televison & Video

0helpful

1answer

I need codes for urc 3220 on a ge tv

GE
002 006 007 018 107 114 310 312 502 601 704 719 803 806 810 901 911
Follow these instructions
carefully. These are as close as i can get you
to getting you operations...the rest is up to
you. GOOD LUCK!

PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER the 3 digit code for your brand.
You should receive 2 quick flashes after entering your code.
PRESS the POWER button to test the code.

PRESS the button for device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER 9-9-1 (two blinks on the remote)
ALTERNATE slowly between the POWER key and the DEVICE(TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER)
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

Blinking Back the Code:

PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)

If the remote DOES NOT blink it means the number is 0.
This is your 3-digit setup code.

Read full answer

Jun 24, 2009 • GE 27GT271 TV

0helpful

1answer

Need code for zenith on urc-3220

PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER the 3 digit code for your brand.
You should receive 2 quick flashes after entering your code.
PRESS the POWER button to test the code.

PRESS the button for device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
ENTER 9-9-1 (two blinks on the remote)
ALTERNATE slowly between the POWER key and the DEVICE(TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER)
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

Blinking Back the Code:

PRESS the device,(TV,VCR,CABLE,etc.), button - RELEASE
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)

If the remote DOES NOT blink it means the number is 0.
This is your 3-digit setup code.

Read full answer

Mar 03, 2009 • RCA Universal Remote Control

2helpful

1answer

I have a Mitsubishi WD-62525. This morning my TV would not turn on so I pressed the rest button. After the Timer light stopped blinking I pressed power. I could hear the fans start than a somewhat loud...

the status light blinking red means a fan (the unit hs 4 of them) has failed. you need to determine which one. use the self diagnostic function:
Error Code Operational Check
Note: The TV must be in “Shut Down” and not manually switched Off, to perform the Error Code Operational
Check. When the TV is switched Off, the code automatically resets to “12” No Error.
Press the front panel “DEVICE” and “MENU” buttons at the same time, and hold for 5 seconds to
activate the Error Code Operational Check. The LED will then flash denoting a two digit Code.
Note: The front panel buttons must be used, NOT those on the Remote Control.
• The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2 second.
• The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
Example: If the Error Code is “32”, the LED will flash three times, pause, and then flash two times.
• The Error Code is repeated a total of 5 times.

and read the code.
35= Chassis Fan failure
36 =Exhaust (Back Cover) or Lamp Ballast Fan failure
37= Engine (DMD or Lamp) Fan failure

Read full answer

Nov 15, 2008 • Mitsubishi WD-52525 52" Rear Projection...

1helpful

1answer

Doesn't turn on, but LED blinks 5 times

The 5 blink code indicates a loss of video. This could be as simple as bad connections on the main board or a couple of defective transistors. In many cases the parts cost is $5-$25. Add in the local labor rate for the total repair cost.
Dan

Read full answer

Jun 13, 2008 • Televison & Video

27helpful

9answers

Enter codes for remote R55L8-RCR4358

There are 4 ways to program your remote:
-Brand Code search and entry
-Direct code entry
-Manual Code search and entry
-Auto Code search and entry
*ON TV/VCR(DVD) combos you must program each button individually and that button(ie. TV or VCR/DVD) will program that part of your device.
*the DVD/VCR button programs DVD by default, in order to program it for VCR you must put it into VCR mode:
1.hold down the DVD-VCR button-->the red led will stay lit.
2.while holding down the DVD-VCR button press the number 2 --> the red led will turn off
3.Release the DVD-VCR button--> the red led blinks 4 times and turns off
4.The DVD-VCR button is now set to VCR mode-->program for VCR

BRAND CODE SEARCH ENTRY:
1. turn on device
2. locate brand codes(sorry, I don't have it, try finding genaric RCA codes)
3. hold down the component button--> led should stay on
4. while holding component button, also hold power button--> the led will turn off, then after 3 seconds it will turn back on.
5. release both buttons--> led will stay on
6. enter brand code--> led blinks once
7. press power button repeatedly until component turns off-->each time you press the power key the remote sends a different code for that brand. led blinks once
8. if power on your device turns off press the stop button to save configuration-> led turns off
9. if the led blinks 4 times and turns off, you have reached the end of the codes for that brand, try using a different method to program your device.

DIRECT CODE ENTRY:
1. turn on the device
2. locate your device codes
3. hold component key down-->led lights up and stays lit
4. enter code while holding components key--> as first key is pressed the led turn off, then as 4th digit of key is pressed the led turns back on
5. release component key-->led turns off, try using your remote, if it doesn't have all of the functions you need, try a different code
6. if the led blinks 4 times after entering code you have entered an invalid code, try again.

MANUAL SEARCH AND ENTRY:
1. turn on device
2. hold the component button--> led lights up and stays lit
3. while holding component button hold power button-> led turns off then turns back on after 3 seconds
4. release both buttons--> led stays lit
5. push the power button a bunch of times until the device shuts off-> each time the power button is pressed a different code is sent to the device, the led blinks each time.
6. if the device turns off press the stop button to save your config.
7. if the led blinks 4 times you have reached the end of the code list, there are hundreds of codes, you may be pressing the power button for a while...

AUTO CODE SEARCH AND ENTRY:
1. repeat steps 1-4 of "manual search and entry"
2. press the "play" button--> led blinks 10 times, sending a code each time
3. continue pressing the play button until the device turns off
4. if the device turns off press the reverse key to until it turns back on then press the stop key to save config.
5. if the led blinks 4 times you have run out of codes, try a different method.
Now if someone would please post the codes, or if someone knows the code for a durabrand DVD-1002...

Read full answer

Apr 09, 2008 • Televison & Video