Acer orbicam har stopd working - Cameras

is it the built in OrbiCam rhat stopped working? Or a Webcam that you purchased?

Been there. You need the driver in the Acer Site. Note !! you need the Acer Orbicam WHQL Driver as well as the Acer Orbicam Utility. The Orbicam webcam is a USB device. Pls follow this steps in sequence.
1. Install ChipSet/Lan Support.
2. Install Acer Orbicam WHQL Driver
3. Install Acer Orbicam Utility.

my acer orbicam has stop working,how do i fix it

Whenever it displays this try and reboot your system and if the problem persist, then t to reinstall the driver for the orbicam. good luckk

try to re-install the orbicam application,
if it isnot working, try to reload the operating system.

my Acer Orbicam that takes picters and vidios stopd working just like that and i dident do enithing rong it just stopd working please can someone help me

Download orbicam driver from www.acerpanam.com

you have chosen the wrong driver, go to the link below and choose orbicam (logitech) not the Bison one

http://support.acer-euro.com/drivers/downloads.html

Has it worked in the past, on this computer?
Have you recently upgraded to Vista?

Here is a suggestion:
There are two software entities involved – the camera Drivers and the OrbiCam application itself

The new driver and a new version of webcam application (below)

The correct files to download are:
Acer Orbicam driver (Bison)
Acer Orbicam Bison utility 1.0.0.13
These can be found here under the MS Windows Vista drop down menu:
http://support.acer-euro.com/drivers/notebook/as_9300.html
You need to download and install them both.

There are two software entities involved – the camera Drivers and the OrbiCam application itself – and BOTH need replacing/updating to fix this problem.
The new driver and a new version of webcam application (below) seem to fix the issue.
The correct files to download are:
Acer Orbicam driver (Bison)
Acer Orbicam Bison utility 1.0.0.13
These can be found here under the MS Windows Vista drop down menu:
http://support.acer-euro.com/drivers/notebook/as_9300.html
In order to fix the problem, you must download and install them both to make the Orbicam work correctly.

FOLLOW THE INSTRUCTIONS BELOW IN THE SAME ORDER:
1. remove the installed OrbiCam application and reboot if required;
2. install the new driver (preferably with the “driver update” wizard from Device Manager)
3. update the Orbicam application 1.0.0.13
After this, the webcam should function properly, even if the original Orbicam icon disappears.
To check everything is working OK run LiveCa07.exe or BisonM07.exe that are located in the c:\windows\bisonxxx\ folder or simply run Messenger