Question about Baumatic B604SS Stainless Steel Gas Single Oven

Gas ove will not stay lighting

My problem is with a Baumatic Stainless steel range oven (dont know the model no) The oven will not stay lighting once the knob which is pressed in to light it is released Normally to light the oven the knob is pressed in and the gas can be heard and once the igniter is pressed the oven lights and stays on after the depressed knob is released after about 20 secs. Now however once the kbob is released the oven goes out again any help would be appreciasted regards Ralph

1 Answer

Shaf Ahmed

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Governor:

An expert whose answer got voted for 20 times.
Expert
139 Answers

Hi there you need to change the ffd on your oven FFd stands for flame faliure device. its like an temperature controlled switch. it is located in the oven and this device is what lets the gas go through once it has reached a certain temp. It must only be done by a corgi qualified engineer and to be honest your loooking at about 100 pounds.

Posted on Oct 10, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Hi. Where can I get a wiring diagram for a Baumatic B906SS oven?

Here are a few possibilities. You can also try customer service at the store or manufacturer.

Baumatic B906SS Fanned Built in Electric Double Oven Stainless Steel B906SS

Baumatic Oven manuals

Redirect Notice

Mar 02, 2015 | Baumatic Ovens

1 Answer

I have a Baumatic double oven and the main oven has stopped working? The fan seems to be working but noheat is being generated, The oven light doesn't come on and the digital clock on the oven doesn't...

It could be a burnt wire or loose wire. test the wires for amps with a electric tester

Jan 24, 2011 | Baumatic B904SS Stainless Steel Electric...

1 Answer

Temperature lights stays on an oven is overheating

From the symptons described, I would say that the thermostat is faulty that controls the oven temperature, normal procedure is replace the faulty thermostat.

Nov 30, 2010 | Baumatic B904SS Stainless Steel Electric...

1 Answer

Loud noise from Baumatic B905 oven whilst cooking and after.

not that familiar with the brand but in other case have fourn the board to be engaging the self clean. not a good sign. and for this model i would think very costly. wishful thinking says the oven temp sensor but i think you have a fauly board. get the same thing with alot of frigidaire ranges.

Aug 01, 2010 | Baumatic B905SS Stainless Steel Electric...

1 Answer

Just tried to install Baumatic B604SS single oven but gas pipe for hob is quite low down and couldn't push oven far enough back. There is a small steel cover at the back of this oven about 4 inches wide...

https://www.manualslib.com/brand/baumatic/oven.html

check this web site for your installation manual. this should answer this particular question.

Aug 05, 2017 | Baumatic B604SS Stainless Steel Gas Single...

1 Answer

Baumatic bottom double oven does not work, both grills work all lights come on, how do i get to the eliment

Have you set the clock right, ovens wont work if clock in auto mode

regadrs
richard saupe
appliance repairman Colchester

Mar 14, 2010 | Baumatic B904SS Stainless Steel Electric...

1 Answer

How do i find out what model my baumatic built in oven is?

There should be a small plate or label on the oven, giving all the details you require.
It could be at the bottom, or inside the door opening, on the rear, on the top of the oven itself, it will be there somewhere, unless it has come off.
Hope this helps.

Dec 17, 2009 | Baumatic B205SS Stainless Steel Electric...

1 Answer

Baumatic B501SS Built In Stainless steel electric single oven

If the fan is working in the main oven and there is no heat, then it will be a faulty element.
Remove the cover at rear of oven
and you will see the round element. remove it and replace with new one.
Plz rate my solution .
Thanks.

Jan 17, 2009 | Baumatic B180 Electric Single Oven

1 Answer