Nees replacement rubber feet for my magic hostess food processor

go to a rubber products shop and get the rubbers or rubbers that will do the job

I have these parts available as of 8/17/17, several recycled parts in stock. Contact [email protected] I also have blade washers and suction cup feet of recent manufacture.

Yes its easy to take the Magic Bullet apart.

1. First pry out the 4 black rubber feet on the base with small screwdriver and unscrew the 4 cross head screws revealed below.

2. Remove this black base to reveal the inner black base Unscrew the cable clamp - 2 screws and the 3 screws that retain the remaining black base to the body of the bullet - slide it off over the power cable.

3. Turn the bullet the proper way up and pry out the 3 white rubber bumpers with a screw driver blade that are set inside for the cup to rest on - each is located with two rubber pins. Once all 3 are removed you will reveal 3 more cross head screws - these countersunk - remove all 3 and then the internal motor will be free to lift out through the top of the Bullet casing.

4. Its possible to slip out the 3 white plastic sliders - taking care to note how they seat each on a small spring to cleanup both the slides and the sliders.

To re assemble step by step in reverse - noting to align the motor cable with the cutouts on the bullet base.

I posted the reply pasted below on how to take the Bullet apart - really not difficult once you know where the hidden screws are apart. Once apart it easy to see where the power cable terminates and should be easily possible to connect in a new cable in its place.

Yes its easy to take the Magic Bullet apart.

1. First pry out the 4 black rubber feet on the base with small screwdriver and unscrew the 4 cross head screws revealed below.

2. Remove this black base to reveal the inner black base Unscrew the cable clamp - 2 screws and the 3 screws that retain the remaining black base to the body of the bullet - slide it off over the power cable.

3. Turn the bullet the proper way up and pry out the 3 white rubber bumpers with a screw driver blade that are set inside for the cup to rest on - each is located with two rubber pins. Once all 3 are removed you will reveal 3 more cross head screws - these countersunk - remove all 3 and then the internal motor will be free to lift out through the top of the Bullet casing.

4. Its possible to slip out the 3 white plastic sliders - taking care to note how they seat each on a small spring to cleanup both the slides and the sliders.

To re assemble step by step in reverse - noting to align the motor cable with the cutouts on the bullet base.

Depending on model, I can offer a free digital copy in PDF format; I have manuals for models 1005, 1010, 1025, 1030 and 1101, though perhaps not identical for your submodel (for example, 1101E/05). Email request to [email protected]

I also have new, functional replacment parts are available as follows: Newly manufactured rubber suction cup feet, sold in sets of 4; nearly 200 sets have been sold to very happy customers. Replacements for the thumb nut used to secure the blade; look different but work well. email [email protected] for more information

You need to buy a new cup or a refurbished one. Search google with keywords "amazon magic bullet cup".

I would suggest calling Kitchenaid Customer Service. If inventory is still available, they will send out replacement feet for your food processor at no cost.

Their toll-free telephone number is 1-800-541-6390.