Washing Machines Logo

Related Topics:

Posted on Mar 18, 2012

It wont spin out

It fills up but it wont spin out water

1 Answer

brian towill

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 37 Answers
  • Posted on Mar 18, 2012
brian towill
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Mar 18, 2012
Answers
37
Questions
1
Helped
10906
Points
91

If it doesnt go into spin brushes in main motor could b stuck or worn check also outlet tube and waste pipe not blocked if it goes into spin but doesnt empty check spin pump not jammed but most common fault brushes in main motorworn

  • Duke-Jinx Jan 22, 2015

    Inductence motor have NO brushes !!

×

1 Related Answer

Anonymous

  • 14 Answers
  • Posted on Jan 28, 2010

SOURCE: water runs but doesn't fill tub and wont spin if put on spin cycl

The drain hose must be higher than the tub of the washer so many times I get called to find the hose on the ground to the drain an this will not let the tub fill.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My washer wont fill up or spin on spin cycle. its not a front loader

SOUNDS LIKE A BLOCKED HOSE SOMEWHERE OR OBSTRUCTION IN WATER PUMP
0helpful
2answers

Washer wont fill

Hi,

If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101


dhjd
0helpful
2answers

Water runs but doesn't fill tub and wont spin if put on spin cycl

The water-level switch regulates your washer's fill volume. This switch is usually a diaphragm device with a small, clear tube attached between the switch and the bottom of the washer's outer tub. As the water level in the tub increases, the pressure on the air in the tube increases. When the pressure reaches a certain level, it activates the switch, shuts off the water, and signals the timer to begin the agitate cycle. If the switch is defective, it may prematurely signal the water to shut off. If so, you probably need to replace the water-level switch.
1helpful
2answers

Maytag washer wont start after it fills

Did you replace the pressure switch its a round plastic thing with a plastic tube at the bottom and six electrical connections
0helpful
1answer

Wont drain or spin is lock up

does not spin all water out, towels are still wet, not overloading, could it be the timer?
5helpful
2answers

Washer will fill fill with water but doesn't start wash cycle

it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked
0helpful
1answer

Will fill water but agitator wont run.

Thats very agitating.There is a motor that runs the agitater,its either going out or you have lost the drive,a little spendy to have fixed.
Hope this helped.Let me know by rating me
For more help go to live chat.
lenwest
1helpful
1answer

May tag washer spin cycle wont spin

check the pump ,,, if pump wont pump out the washer wont spin till it gets down so low / larryyb
2helpful
1answer

Kenmore washer model 110.49722990 it will not go into the drain or spin part of the cycle, just sits there and hums, won't do anything. It will fill with water and wash,but thats all it won't finish the...

Does it fill with "cold" water?Will it spin?Drain?If the machine will fill up with cold water,will the timer advance by itself to finish?Or if you place the timer in spin cycle will it spin?First off if your not getting "Cold" water to fill inside :Replace the water valve (because when the timer stops after the agitation cycle it wont advance because it cant fill up with cold water.
0helpful
2answers
Not finding what you are looking for?

148 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...