Descaling I can't find my manual for my Saeco Odea Giro so I can't descale it, my dad put the descaler in but can't figure it out can you help?

After descaling and rinsing, you need to hold the hot water button for 6 seconds to reset the descaling indicator.

Many times if you perform once more descale the problem can be solved so here is a video that can help to repeat the descale

do you have a video on how to operate this machine

Same problem here. I've googled and see that there are many people with the same problem but no clues about how to solve it:

My Saeco Odea Giro is flashing two lights alternatelly (Dregdrawer Light and Descaling Light). What's the problem and how can I solve it?

That is the descale light, you should run a descale through the machine. After you have done that hold on the water button and the descale light will go away

It means time to descale , however if you want to get rid of it, just press and hold the water button until it goes off.
To descale..fill the container with descaler and let water goes through the system by openning the valve and catch the descaler with a container. Turn off the machine a few minutes and start the process all over again for 1/2 hr, and finally with water to wash the system.(donot want to heat up the descaler too much)

try and hold down the steamer button for 10 seconds, that should reset the descale warning lamp.
Hope that works for you. Andrew

Have you done as described in the manual:
Press the hot water button for
6 seconds to deactivate the
descaling light.

Hold the water button in for about 15 seconds.

This is the descaling indicator.
If it flashing your machine needs descaling.