Not typeing the right letters
Make sure the ribbon and correction tape are installed correctly between the metal fingers on the far side of the printwheel and the cardholder. make sure there is no forien objects in the P/W or anything touching the petals on the P/W. turn mach. off for 10 secounds then back on or just hold down the code key and hit the Q (reset) if it still doesn't work, it will need repair or replacement.
Cooool, Thanks it worked. Yippee The code and Q, was the solution
There are two things that people mess up when changing printwheels and ribbons. Is that the ribbon is not in the guides properly. The other is that the latch the holds the type wheel is not locked in the forward position.
273 views
Usually answered in minutes!
does not type the proper letter when you press the corresponding key
playing with the code and q keys eventually straightened up the typing but when the machine was turned off and back on it was typing the wrong letters again
while typewriting the machine start typing wrong letters
×