- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Screen are to protect the valve from dirt and sand, you can clean the screens at the inlet to the washer but not advisable to remove them. If this is an ongoing issue you can call you dealer and ask for another set of screens to clean out at the hose connection to the wall, it could be easier to clean in the future. You can also call you local plumber for advise on how to prevent this from happening. Good Luck
It depends on what connections they both have. Most modern TV's use either HDMI or Optical outputs. If the Surround amp has neither of them, you are going to struggle. If there is a co-axil socket on both you can connect using that.
No,only way to placed the Plasma screen panel,that not an option,because replaced the Plama screen panel will cost the same as a new tv.Sorry have to live with the burn in image or buy a another tv,buy a LCD or a LED tv this time,not as bright and that good with cinamax movies,like a Plasma tvs,but u will not have burn in easy as a Plama tv.
No,the Plasma tv screen is cracks and damage.Take an insurance claim against the moving company.Sorry the plama screen is 90% of the tv,even u can buy the plama screen from the tv company to repair.They will sell the Plasma screen to u the same as a new tv.Even might cost more after the new plasma screen it put in.Now the tv only worth as for salvage electronic boards parts only now,not as a whole tv anymore.
All LCD and Plama tvs brands are very simular,but the well known brands have more refurbishes electronic's boards out there to buy for the people who do it ur selfer repair for their tvs sets.The contrast and refresher rates is not standard.Must read the tv owner manual in each tv brand to find out.The most common in all LCD and Plama tvs problems are dead or dying capacitors in the power supply boards and it supporting boards.The CRT analog tvs it a Tube design in the past it hold heat better,that why doesn't kills capacitors as fast as today LCD or Pasma screen tvs.
http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=751045 Generic problem for all Vacuums Brush won't turn Posted by andbecks on Jul 07, 2008 Brush won't turn Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Without knowing the brand name and model #, the reason that your brush is not turning might be you may have a broken belt (always use genuine belts from the brand name manufacturer) and it needs changing, or the bearings in the brushroll are froze up and it would need new bearings or a genuine replacement brushroll. The belt change should be done every 4 to 6 months for the best cleaning, and to store the extra belts in a Ziploc bag in the refrigerator. The next time you request a question, please have a brand name and model # so I can give you more accurate information. Thanks, Don the Vac Man Go Ahead. Use Us.