Magic sing....i cant hear my voice or anything but all videos and songs are fine help!

1/2 the movies made are like that,
if one movie is ok, and other not , it's the sound mixing
man that made movie. (many are bad)
like when they play loud music over dialog in a drama.
silly but they do,that, . (unlike better movies)
the only cure (hope) is using dolby 5.1 on up
and hope the sound channels can allow you to hear what you want. some content allow the front speakers to be increase for better voice.

I think there is a problem with the microphone. get a technician to dismantle the phone and replace the mic

how can I started playing the magic sing I dont have my instruction manual, I tried to hook into the tv but it doesnt work

You need to connect directly the sound wire of your magic sing to your home theather while the video wire of your magic sing directly to your hdtv. If its difficult to do because of distance, buy an rca extension to extend your magic sing wire to make it reach to the other end.

SingSnap Voice and video Setup
SingSnap is a free site boasting an extensive song list with a wide range of styles and time periods available.
(There's plenty of Def Leppard!) Don't be fooled by what's available to view - the site lets you use three kinds of
web cams. It seems few folks use them though, but who knows why. There's a configuration wizard process for audio,
video, and Internet settings, making it a real, well, snap to set up. The site lets you tweak your video look, and
turn on or off ratings, comments, duets, and embeds. There's a pay option of $7 a month that removes advertising and
gives you an expanded song selection.

Copy this web site and paste it in your browser and HIT ENTER:

http://www.singsnap.com/snap/singandrecord/intro

CLICK on this: Run the SingSnap setup wizard...

Then you will find the SINGSNSP WIZARD, follow the instructions and it should work with both Video & Audio.
At the bottom of the WIZARD click on PROCEED.

Hope this helps. Bud

HERE IS THE FAQ SECTION WHICH MAY ALSO BE OF HELP TO YOU>

Copy this site to your web browser address bar

http://www.singsnap.com/snap/help/faq

for additional Frequeuently Asked Questions (FAQ) I inserted a few below to help you.

#1 Can I improve the video quality on my recordings?

Make sure you have nice, bright lighting for recording video. Also, you can try running the Setup Wizard again.


#2 Can you help me find "Stereo Mix" / "What U Hear" on my sound card?

Sure, click "Start" -> "Control Panel" -> "Sounds and Audio Devices" -> "Audio" -> Click the "Volume" button under "Sound recording" -> "Options" -> "Properties" -> make sure everything is checked -> click "OK".

You should now see the "Stereo Mix" or "What U Hear" line if it's supported by your sound card.


#3 Can I use a USB microphone to record?

Yes, you can. When you record with SingSnap you have the option to "Enable Music" in the preview step of the recording process. When "Enable Music" is checked the voice track from your USB microphone will be mixed in with the music track.


#4 How should my sound card be configured when "Enable Music" is checked?

When "Enable Music" is checked it means the voice track from your computer will be mixed in with the music track from our server. For this reason your sound card settings should be set to record "Mic" and not "What U Hear" or "Stereo Mix" so that only your voice is recorded.

Here's a step by step guide on how to do this in Windows XP:

- Click "Start", (possibly "Settings") and "Control Panel"
- Double Click "Sound And Audio Devices"
- Click the "Audio" tab at the top
- Under "Sound Recording", click the "Volume" button (about half way down)

This brings up a new box, likely titled "Record Control" with some sliders on it. You need to look for "Mic", "Microphone" or "Input". If you don't see this, look for something that is similar or means the same thing. If you still don't see anything:

- Click "Options" (in the menu at the top of this window)
- Click "Properties"
- In the white box, check "Microphone" or anything similar
- Click OK

Now try to select the microphone (or whatever it is called on your machine).

If you are using a Webcam or USB microphone or mixer, you don't need to do any of this. Just run the wizard and select your webcam or USB mic from there.

Hope this is of some help to you. Bud

i also am not really good at this but ive been a member of our school choral since elementary, hs and college, church choir too.. we dont get lectures about singing but we were taught that for our voice to come out good we have to open our mouth wide.. like when we say "O", open our mouth wide enough to fit 3 fingers... dunno how to explai it but it works especially if you're singing without microphone, that is to exaggerate your voice.. then you have to feel of course what youre singing, facial expressions is also a way to project...

do vocalizations, exercise for singing, inhaling and exhaling..etc

then when singing, youve to know when to inhale and exhale so that you wont sound like you lack oxygen.... to not try to sing too high pitched song (if you sing like mariah well u can) if u cant, try to sing songs according to your pitch, so that you can project or sing it well without cracking, hmm like sounding flat or sharp..

good luck..

and btw, i think there are tutorials on youtube for singing lessons.

if my suggestion andonline lessons doesnt work then try to attend voice lessons with pro.. smile!

probably the amp section- I am working on a STVG-700 right now, the audio amp is mounted on the lowest circuit board in the case, includes the power supply except for the transformer. There are fuses mounted on this board, with luck that's all that blew on this. I know this problem is months old, but if you're like me and didn't get it fixed quickly, it's still sitting around somewhere...

hi there...try this
1. turn mic off
2. press and hold 8, then press power button (to change to NTSC)
press and hold 9, the press power button (to change to PAL)

Mr. Sean A. DelCarmen
Customer Service Dept.
In A Jiffy Ent. - Wow Magic Sing
1081 EDSA Balintawak
Quezon City 1106 Philippines
[email protected]

Maybe your headphones are pulled out halfway.

hi there..if there is video and background audio coming out from the TV, and no voice recognition from the mic- then mic is the problem. I believed the problem is the "voice coil". This is a part that can be replaced- you can contact me and we can repair that.

two ways to check
remove the mic ball
the part which the mic ball is is covering is the voice coil.
try holding both terminals (black and white wire)- if there is feedback sound- it is open and need to be replaced
try using your tester- test the impedance- there should be 500- 600 ohms reading

([email protected] or customerservice @magicmic.com)