Question about Konica Minolta bizhub C450P Laser Printer

1 Answer

ADF of Minolta C450 is not working

When I load paper to the document feeder, I do not hear a beep and no notification is lit on the screen. When I press start button, the copier starts scanning the document on the exposure glass. Can you please let me know what the problem is?

Posted by arsto on

  • arsto Mar 14, 2012

    Could you please tell me where the sensor is located? I believe there is no problem with the cable, which connects the xerox to the ADF

  • arsto Mar 14, 2012

    I mean the sensor which tells whether there is paper on the ADF or not.

×

Ad

1 Answer

Louis Du Plessis

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

The sensor switch were you put the paper in detects the paper is there if the switch is working the adf board is fualty or the cable between the machine and adf broke from all the open and closeing after that the board in the copier were the cable plug in may be faulty swop the around with annother machine if avalible.

Posted on Mar 14, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta 4690MF - Paper jams in ADF


If it physically doesn't go through, try to push a heavy stock card or decent thick laminated paper and try to feed it through. There maybe a mylar (plastic sheet) flipped backwards or a piece of debree stuck in paper path of your Document Feeder. This may resolve 80% of issue.
The rest could be broken sensor flag (actuator) or dirty sensor that is not reading the paper passage (or it the sensor is faulty all together)
The amount of staples, paper clips, Bluetag and other junk I pulled from ADF over the years..Bucket loads :)
Good luck.

Sep 24, 2016 | Konica Minolta Magicolor 4690MF...

1 Answer

Adf konica minolta bizhub 350. theres adf working good but no printout. a few minute machine says jam paper at adf. actualy original it was throw out.. help me please...


Konica Questions answered here ' FixYourOwnPrinter

www.fixyourownprinter.com/posts/40820
Aug 22, 2008 - Am working on a Magicolor 2300 DL that sometimes fails to lift the paper tray ... good afternoon I have a konica minolta bizhub c550 when I open the ... I'm no printer tech, but in most other lasers (HPs, etc) the paper tray lifts, .... It seemsthere is a "waste toner sensor" which only lets the printer print out a few ...

Konica Minolta paper jam adf scanner Questions & Answers ...

www.fixya.com > Forum > Tags > paper jam adf scanner
Question about bizhub 350 All-In-One Laser Printer ... Konica Minolta bizhub 250 jammed but no paper ... Good luck. ... ...paper is there if the switch is working the adfboard is fualty or the cable between the machine and adf broke from all the ...

Konica Minolta bizhub document feeder not working ...


Jan 23, 2016 | Konica Minolta Office Equipment & Supplies

1 Answer

Hi, Bizhub c450: i have a problem on scanning over the rear tray if i put paper inside message will appears close section properly but there is no other error code appearing on the screen.


When you say the rear tray what do you mean, ON the document feeder tray or raising the document feeder up placing the document on the big glass. Never heard of a rear tray?????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 04, 2015 | Konica Minolta bizhub C450P Laser Printer

1 Answer

How to set original to adf


Check the document feeder is it aligned properly. There is a small magnet and sensor magnet on the Document feeder right front sensor under the plastic that side ensure they are aligned. Does happen when you make copies?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Mar 16, 2013 | Minolta FAX2900 Plain Paper Laser

1 Answer

Display remove paper from document feeder but there is no paper on it


Then a sensor is dirty with paper dust, yes paper has dust! Check the cover that opens on ADF. and also check the under the ADF. along the white strip that covers the small glass area. Also check the acturator that hangs down and goes up when the paper is placed in the document feeder (ADF) normally it should be handing down

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Oct 22, 2012 | Minolta Di3510f Bizhub Copier

2 Answers

Paper jams


Paper jams - Kodak Printers

Feb 19, 2011 | Kodak Office Equipment & Supplies

1 Answer

It stopped faxing through the feeder and said feeder errror. its a HP j4680 all in one office jet


Hello, Brittany.

Give this a try (from HP Support):

Complete the following steps to check the condition of the paper, reload the original, and then open and close the Automatic Document Feeder cover.

The main reason for this issue is that the ADF rollers that pick up the papers might not grip the paper because dirt sticks to the rollers.

Step One: Check the paper and reload the original
The condition of the paper, or the amount of paper, might prevent the ADF from picking it up and feeding it through the product.

1. Make sure that the ADF tray contains fewer than 25 sheets of paper.
2. Make sure that the ADF tray contains no photo paper or carbon paper.
3. Make sure the paper in the ADF tray meets the following criteria:
* No curls, folds, creases, or tears
* No staples or clips attached
NOTE: Folded paper, torn paper, or paper with rough edges might not feed correctly. If your original is folded or damaged, either reprint the original or try to smooth out the damaged portions.
4. Reload your original, with the print side up, into the ADF tray. Place the pages so that the top edge of the document goes in first. Slide the paper into the ADF tray until you hear a beep or see a message on the display indicating that the loaded pages are detected.

* If still a problem, go to the next step.

Step Two: Open and close the ADF cover
NOTE: Remove all originals from the ADF tray before you open the ADF cover.

1. Open the ADF cover, and then close it again.
2. Press the OK button.

* If still a problem, go to the next step.

Follow these steps to turn the product off and then on again.

1. Press the Power button to turn off the product.
2. Wait 15 seconds.
3. Press the Power button to turn on the product.

Hope this helps.

Feb 26, 2010 | HP Office Equipment & Supplies

1 Answer

When trying to fax I get an error "open adf cover"...


You should be able to. It sounds like you've got a paper jam in the document feeder. Chances are there was a jam and part of the document (a small peice perhaps) is still lodged in the document feeder unit.

Aug 31, 2009 | Konica Minolta PagePro 1390MF All-In-One...

1 Answer

Automatic document feeder not working


Open the adf and rotate the pick assembly till you hear a click and then take a coin and run it up and down against the separator pad and then see if the adf picks the paper or not.If this does not work try this *# 329 and scroll thru and select adf pick test if that fails its time for you to get the printer replaced or get an upgraded printer

May 29, 2009 | HP Officejet Pro L7650 Printer

Not finding what you are looking for?
Konica Minolta bizhub C450P Laser Printer Logo

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...