Sanner the scanner will not work everytime i press scan i would like to put a picture on my destop but i cant

Here is a link to the owner's manual:
http://www.uniden.com/pdf/BC340CRSom.pdf

If the weather band is working, the scanner should be working. To verify operation:

- Move the MODE switch to "Scanner" and power the unit ON.
- Press the SVC button (chrome button below display).
- Press POL (chrome button below display).
- Turn the SQUELCH knob towards the left until scanning stops and you hear a hissing noise.
- Turn the SQUELCH knob towards the right slowly until scanning resumes.

If the scanner stops on anything - even noise, it's working.

To Program:

- Slide the MODE key to "Scanner."
- Power the unit ON
- Turn the SQUELCH knob to the left until you hear a hissing noise, then turn it the right - slowly - until scanning resumes.
- Press HOLD.
- Press E (PGM).
- Press 0, 1.
- Press HOLD.
- Enter your first frequency, including the decimal point (EX: 156.055).
- Press the E (PGM) key.
- Press the UP arrow (above the SCAN key). Scanner will move to channel 02.
- Enter your second frequency, including the decimal point.
- Press the E (PGM) key.

You should now have two frequencies programmed. Press the SCAN key . . .

If it still will not accept programming, let me know.

BillB

just connect the ps2 port of your keyboard with female port of bardcoder & then connect the barcoder port to kbd ps2 port

.reload the drivers and software that came with the scanner.....this should fix ur issue


keep me posted

This is usually happen when the scanner driver is now properly intalled. So rt on my computer, click on mannager ,device mannage, choose the scanner driver , click on uninstall the driver. or remover the device. restart the computer. on the scanner then your computer will search the for the driver then place the disk driver and setup the driver. i hope that your sanner will work.

turn the printer on, place the picture on the glass, on the printer under mode press the big silver button until the scan light comes on  then press select, you should hear the picture scanning, then on the computer, go under my pictures and you should see that picture. 

To scan an item to your computer with your printer: put what you want to scan in scanner, go to my computer, click the scanner icon, and press the last option (the one at the bottom). If you found this helpful, post a solution or something and say this was helpful, thx.

I want to scan my document in PDF. The only that I can scan it for picture documents

TWAIN Driver and EPSON Scan Utility v3.04A

http://www.epson.com/
Hi, try this version just visit epson web site to download scanner driver.

Same problem thanks for ignoring guys!