Question about HP Color LaserJet 2600n Printer

1 Answer

I haven't the manual for this printer color laserJet 2600n series,

Need to change the ink cartridge but i haven't a clue on how to do this, need step by step instructions. Help please

Posted by gcheechoo on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Document.tlSearch.tx.value=unescape("") I haven't the manual for this printer color laserJ - s.gif
HP Color LaserJet 2600n Printer - Installing Print Cartridges When a print cartridge approaches the end of useful life, the control panel displays a message recommending that to order a replacement. The printer can continue to print using the current print cartridge until the control panel displays a message instructing to replace the cartridge. The printer uses four colors and has a different print cartridge for each color: black (K), cyan (C), magenta (M), and yellow (Y). Replace a print cartridge when the printer control panel displays one of the following messages: Replace yellow cartridge, Replace magenta cartridge, Replace cyan cartridge, Replace black cartridge. The control panel display also indicates the color that should be replaced (unless a genuine HP cartridge is not currently installed). Change the print cartridge

  1. Turn off I haven't the manual for this printer color laserJ - c00315320.gif
  2. Open the front door. c00315320.gif CAUTION: Do not place anything on the transfer belt (ETB), which is located on thI haven't the manual for this printer color laserJ - c00315321.gifthe front door.
  3. Remove the used print cartridge from the printer.
  4. Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling. c00315322.gif
  5. Grasp both sides oI haven't the manual for this printer color laserJ - c00315323.gifartridge by the blue handles and distribute the toner by gently rocking the print cartridge from front to back. CAUTION: Do not touch the shutter or the surface of the roller.
  6. Remove the orange shipping locks and the orange shipping tape from the new print cartridge.I haven't the manual for this printer color laserJ - c00315325.gif shipping tape and shipping locks according to local regulations.
  7. Align the print cartridge with the tracks inside the printer, and using the handles, insert the print cartridge until it is firmly seated. c00315325.gif
  8. Firmly close the front door. c00315326.gif
  9. Turn on the printer. After a short time, the control panel should display Ready.
    NOTE: If a cartridge is in the wrong slot or is the wrong type for the printer, the control panel will display one of the following messages: Incorrect yellow, Incorrect magenta, Incorrect cyan, Incorrect black.
  10. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.
  11. If a non-HP print cartridge is in the printer, check the printer control panel for further instructions.
    NOTE: When replacing or changing a black print cartridge, a cleaning page will automatically print. This helps prevent speckles on the front or back of printed documents. A cleaning page can also be generated using the control panel or the HP Toolbox.

Posted on Nov 03, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an HP Color LaserJet 2600n. Recently I had to replace the magenta cartridge. I bought a 3rd-party cartridge and the printer display shows that magenta is now "full." But, it won't...


I guess you should try to reset it ..and get the cartridge out and see if the toner (ink ) is getting out ..by pressing it (with the part where you removed the tape ) on some absorbent paper ..when it is working well it should leave a mark on the paper ..the mark should be not washed ...but real color and all...
If it do not ..just use a syringe and blow air in the cartridge ..just to agitate it ..and make sure it is not dry ..
Insert it back ..repeat the procedure until works ..and also if you have the procedure ..reset it ..
http://www.ehow.com/how_6881778_reset-2600n-toner-chip.html

Aug 09, 2011 | HP Color LaserJet 2600n Printer

1 Answer

How do you change the ink cartridge?


open the front door of printer.
then u see there ink cartridge pull away it.
and change youtr new cartrdge.

Apr 06, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Printer Cartridge Leaked


clean the belt with a VERY SOFT cloth, there is a release lever to access the back of the belt. Replace magenta cartridge

Mar 11, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Black ink only?


No, the answer is not.
printer need all fo the ink cartridges in order to print.

Feb 09, 2009 | HP Color LaserJet 2600n Printer

1 Answer

HP2605dn will not print


yes, it is normal
the newer printer has senser for ink cartridge. printer will not print if any of the ink cartridge is empty.
therefore, you need to replace the emply ink cartridge in order to print.

Jan 14, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Magenta cast over whole page


IF IT WERE A 4600 SERIES THAT WOULD BE THE DC CONTROL BOARD

Jun 22, 2008 | HP Color LaserJet 2600n Printer

1 Answer

HP Color LaserJet 2600n


In printing a black shed all the paper

May 18, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6135 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...