Epson Stylus C64 InkJet Printer Logo

Question about Epson Stylus C64 InkJet Printer

1 Answer

Only one colour showing at time of print

Loaded new catridge (black) shook it it before installing only the Blue showed up. Did the cleaning and nozzle check but to no avail.Using Windows XP Home edition.

Posted by John Dunne on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Maybe the ink well nozzle area has some dried ink left from the old cartridge. Remove the new cartridge carefully, and using a wet Q-tip,clean the area. Replace back the new black cartridge.
This worked for me ....good luck !

Posted on Dec 22, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

HP Photosmart. I cannot print in black, all ok for printing in colour. have installed new black cartridge but problem persists. have also cleaned printer head.

tkae out the print edge of the catridge by raising the lever
their is propably some clog that have blocked the ink from the black catridge unit by the catridge head


hope you understand
0helpful
1answer

Hi B/w printing is ok but color printig seems blurred and fainted and blue is missing

hi.....

This is because the colour catridge might have finished.
for black and whicte printing you have separate catridge.colour catrige is a tri colour catridge which contains three colous in it.The blue colour might have finished. So please change your colour catrige and it wil ok.

thanx
1helpful
2answers

I changed my black ink and now i get the message left cartridge incorrect..how do i fix it?

HP PSC 2210 InkJet Printer. The following has to be done for checking the Blank Ink Catridge working : 01. Remove the existing Black catridge and Color Catridges from the Printer carefully. 02. Clean the location with a soft cloth with cleaning liquid to make the place dust free. 03. Put the correct black and colour cartridges recommended by HP and that too genuine one. 04. Do not use any refilled or reinked local catridges that will spoil the HP PSC 2210 printer. 05. Re-install the catridges both Black and Colour properly. 06. Take a test print out - both black and colour print outs. 07. Check the Printer status and there is no warning of Cartridges wrongly inserted. Have a Good day.
1helpful
1answer

Quality of colour

hi! there, well in connection to your poor printed color there posibility that ink was insufficient to distribute to you photo to print try to visit your ink status, black color is sepated to 3 color catridge.if there's a insufficient ink in catridge,replace or refill any thing as long there is much ink in your catridge,if ok and print still not good,try to clean your printer headdont use any thing to clean your printer herad,the printer will clean your printer head,on maitenance menu,click clean,try several time,also try to align your printer head,click aligned,t check the pattern of your printer,click pattern test.if ok try toprint if the color print is balance,try to print.check the preview before you print adjust the quality color as in yout tate before printing.regards and have a nice day.
0helpful
1answer

Canon ip1000 not printing even after replacing a new ink catridge

This might seem a dumb answer, but have you removed the PULL tab over the breathing hole. I had a similar problem until I realised my error.
0helpful
1answer

I've installed a new coloured catridge but printer

did u remove the peel off cover that protects the contacts or the print head on the new cartridge?
0helpful
1answer

INK

download the utility ssc service from the site ssc.com and use the power cleaning option
0helpful
1answer

Only black printing prints out

Try to clean your catridge through software tools.try for 2,3 times if same thing happens replace your colour catridge.
0helpful
1answer

Not printing

hi sand;
you may try cleaning the copper in your cartridge with tissue paper and also the pins in the printer but do it slowly, and see if it works
thanks
0helpful
1answer

HP PSC 1510 All-In-One InkJet Printer- Won't print!

try install catridge one by one see whether it is accepting or not. just install black catridge and see if you not getting any error that mean your balck catridge is ok may be problem with colour catridge it may me becoz of dry ink or dust in catridge nozle try to clean the catridge by tissue paper and see. bye
Not finding what you are looking for?

72 views

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6490 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...