Question about Dewalt DC011 AM/FM Radio
My radio stopped working. It doesnt turn on or anything..Its only 1 1/2 years old.Thanks for any help you can give.Todd
Have you tried changing the AA Batteries, sounds simple, but a lot of people forget to try this. When they go flat, they lock the radio out and nothing will work. HHM Dewalt Agent
Posted on Dec 21, 2007
Here in canada when radio are expose to cold weather aa battery
will lost its charge causing the radio station not to.
Posted on May 27, 2008
Hi Todd Smith, indicate the brand, model and type of equipment you are commenting on, in order to find the best possible solution
I wait your answer
Regards Franco Dosil
Hola Todd Smith, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil
Posted on Oct 08, 2019
Probeer pin 1 en pin 6 van de eindversterker heel even kort te sluiten. Als de eindversterker zonder spanning komt (als de pennlites leeg zijn) gaat deze in de stand by mode! En doet niets meer. Dit is alleen op te heffen door even pin 1 met pin 6 te verbinden. Succes! Bij mij heeft het gewerkt!
Posted on Oct 06, 2019
My radia just went compleatly dead. I can hear it click on,
but no display or sound at all.
I replaced the aa bateries but still nothing,.....
Posted on Aug 08, 2011
Posted on Sep 14, 2008
I had same problem . changed batteries and it worked.
Posted on Apr 28, 2008
After you have removed a plethora of screws you will be looking at the circuit boards. On the upper left is the Power board which feeds the ESD metal encased board(s) on the bottom. Look for the fuse on the power board on the upper left side of the case. Be careful when the cover is off that you don't break the display bezel. Hope this helps. Wish I could get the scematic for this unit...it would make life much easier.
Posted on Oct 06, 2006
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: