Motorized Screen gets stuck sometimes - Any fix for it?
I have a Alpine IVA-C800 (As far as I can tell, no different than the IVA-C801 which is why I am posting here as the C800 doesn't appear on this site) and the screen gets stuck when I retract it about 50% of the time. The screen also gets stuck when opening as well when it gets to the part where it lifts up. I have to help it by pushing it. I have tried adjusting it using the controls but the screen will not full open by itself and closing is now 50/50. Is there any way to fix this? It's the only thing wrong with it. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go to https://www.manualslib.com/manual/529923/Alpine-Iva-D310.html or 1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
] of GENERAL SETUP.
The GENERAL setup screen appears
Set to OFF
based on my previous experience with the Alpine Mobile Multimedia
Station, 1 wire needs to see 12 volts ie. brake light wire, the other
needs to see ground ie. parking brake.
You can hook up the wire that needs 12 volts to either ignition or some
other 12 volt source. The other wire needs to be connected to a toggle
switch to ground. Then flip the switch as needed to simulate the
parking brake and voila...