47024 model troy bilt chipper

I bought a bad photocopy of the Operator manual from a seller on eBay, and put it online:

[URL="http://asavage.dyndns.org/Troy-Bilt/"]http://asavage.dyndns.org/Troy-Bilt/[/URL]

It\'s not great quality, but it\'s better than nothing.

I\'ve got some parts manual pages there, too. Also of dubious quality, but you can make out the part numbers.

Hi and welcome to FixYa. I am Kelly.

Go to this site:

http://www.brentchalmers.com/

I note your looking for the Super Tomahawk. If you can come up with a model number I think I can find your parts manual for sure. (or at least an on-line parts list.) Also.... If you can come up with an engine number like OH120 or L90 off of the engine I can find you a manual for the engine also.

This is the list of Manuals available there:

1983 W-W Grinder Inc. Manual and Parts List Super Tomahawk 5-8-2G/C and Tomahawk 5-8-2G/M Chipper/Shredder (40 Pages)

1989 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1989 Troy-Bilt Technical Manual 4HP, 5HP, & 8HP Models Tomahawk Chipper/Shredder (12 Pages)

1991 Troy-Bilt Owner/Operator Manual Junior Tomahawk Chipper/Shredder (24 Pages)

1991 Troy-Bilt Knife Kit number 1772231 (1 Page)

1992 Troy-Bilt 5HP Model Service Kit (Part Nos. 1901153 and 1901804) For Chipper/Vac (1 Page)

1992 Troy-Bilt Owner/Operator Manual 47260, 47261, 47271, 47272 Chipper/Vac (60 Pages)

1993 Troy-Bilt Sales Brochure Chipper/Vac (4 Pages)

1993 Troy-Bilt Owner/Operator Manual 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (44 Pages)

1993 Troy-Bilt Parts Catalog 47265, 47266, 47267, 47276 Tomahawk Chipper/Shredder (16 Pages)

1994 Troy-Bilt PTO Chipper/Shredder Owners Dog Clutch Kit 1902404 (1 Page)

Hopefully your model is one of the above.

Here is link to the Parts manuals:

http://www.partsandservice.com/html/TroyBilt/cs/

There are 90 parts manuals there.

Again with a good model and engine number I can probably come up with your exact manuals.

Thanks for chosing FixYa,

Kelly

Hi and welcome to FixYa. I am Kelly.
For parts go to this link: http://www.partsandservice.com/html/TroyBilt/cs/cs47279-4727901.html

For the Opertors manual call Troy-Bilt at 1-800-833-6990
For Parts 1-800-648-6776

This is the manual for the unit just below the 47279 i.e for the 47276 and will be close but NOT exact for your model.
http://www.brentchalmers.com/Literature/472655-447267and47276_OwnersManual.pdf

Letters:
Troy-Bilt Mfg Company
c/o Technical Service Dept
102nd St. and 9th Ave
Troy, NY 12180

Just note that this is historical information. Troy-Bilt was purchased by MTD in 2003.

Thanks for choosing FixYa,
Kelly

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

i NEED A REPLACEMENT VACUUM SNOUT FOR A 1990 TROY BILT CHIPPER-VAC. THERE IS NO MODEL NUMBER FOR THAT YEAR, ONLY DESIGNATED AS "MODEL 5 HP".

Get in touch with [email protected] or 651-786-4277 he has parts new and used. Also does bag repairs

Troy Bilt Part Number 1762636

HI believe that we have a 47287 8 hp chipper/vac where would i find Model on chipper vac

You can get the impeller parts at:

http://www.thefind.com/garden/browse-troy-bilt-chipper-vac-parts

Good luck,.,

I just purchased a used 47261 yesterday for $200 .. It is like new, but I may need a new bag from this site and I will need to find a manual somewhere.

MrBill

I have the both the manual and parts catalog for Troy-Built 8hp Tomahawk, can send them to you for the cost of coping and postage if you haven't found them yet.
Ron Bowman, [email protected]