- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your batteries are too low.
When you switch on the camera, the lense go in. Then lense comes out fully. Then, if the batteries are low, lense goes in and camera turns off.
But if the batteries are too low, camera turns off before the lense retracts or even before the lense comes out fully.
I had the same problem. This happened because the lenses is jammed and these always happened when u droop the camera or press power button while the camera in it’s carry case or even on ur pocket which led to an obstruction of the lenses to extend probably. In my case my son put his hand on the lens and stopped it from extending. The solution is try to tape the camera gently with the palm of ur hand, may be some dust is the cause, If it did not work take it to the service, I highly recommend that you should go to the agent, and u should know that it’s only repair of the lenses u don’t need to replace the lenses. I went to some one to fix the problem and he said that “it’s need a new lenses but when I emailed the agent of sony they calledme immediately next day and asked me to go to there service and they make it for me forfree because it was in the warranty period. I hope this help, and I’m sorry for my bad English. Please have a nice time
Whenever you switch on the camera the lense comes out to a certain places, stops and the camera is initialized to take the picture. In some cases when there is a friction in the movement of the lense, it does not comes out fully up to the proper position. so the camera mechanism draws it back and again pushes it out. this happens 3-4 times and if still the lense does not reaches its position it displays "turn the power off and on again" and the problem continues.
4/8/08 FOR ALL CCD SENSOR'S MFG by Sony: Found the answer. Sony Repair service is fixing for free any CCD sensor problems on "any" camera that had a "Sony Manufactured CCD sensor". I have now called the service center and they sent me a UPS Return label so I can send my camera in for "free" repair. This is good news!!! I can't remember the site I was on but they listed all brands that had the Sony mfg. CCD sensors in them. So call the Sony Repair Center to find out if your camera has the Sony CCD sensor in it. This was an error in the manufacturing process and they are standing good for this.