Question about GE Profile JTP18 Electric Single Oven
Cleaning the contacts is a myth. What you are doing is temporarily disrupting a short circuit near the slot in the touch panel. With time the short circuit returns. The cure is to add insulation. E-mail me at [email protected] for the real solution. This posting made by Powerman
Posted on Apr 11, 2007
I have had the same problem on mine, but I have 2 single ovens. We had the ribbons cleaned and that seemed to work for about 5 months, but now the problem is back. I notice it acts up more in the winter when it is a rainy day? We have to cut power for 2 minutes or so before we can use them. One is almost nonresponsive at all, and the other works intermitenly. Frustrated in CA
Posted on Jan 12, 2007
Thanks Catriver! Cleaning the contacts with an eraser solved my F7 problem. You are awesome!
Posted on Sep 28, 2006
GE, F7 is a stuck or shorted keypad. You can unplug the keypad ribbon cable from the main board and try to clean the ends with an eraser. See if the code comes back. Catriver...post back.
Posted on Sep 26, 2006
Tips for a great answer:
Hello & Welcome to FixYa
F7 error code is displayed when the clock assembly/electronic range control (ERC) goes bad and needs replacement. Please get back to me if you have any other questions.
Usually answered in minutes!
Step 2: Please assign your manual to a product: