No disk when i put a disc in the player, i get a no disc reading on my screen. never had this problem before. it does not matter which number that i put it in or which disc i use (new or old) thanks for your time michael carmona

1 more comment
cocoy Nov 14, 2007

my cd rom does not anymore, it cannot read any disc
Grzeshiek Dec 18, 2007

My dvd stopped reading discs. Discs doesn't spinning. Before that I must insert disc several times before dvd player started reading... Cleaning disc can't help because disc doesn't spining. Anybody have thit king of problem?? I has been a couple of years since warranty passed...

I'll be grateful for any help

Sorry for my english... I'm not native english speaker and writer :)
Anonymous Mar 31, 2008

Same As Above Same As Above

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.
Contributor
7 Answers

Panasonic DVD players have five 0 when you first insert the disc. If none or just 1 of these light up then you have a problem with the motor. I'm guessing that your spindle motor has seized. This is a pretty common problem on Panasonic DVD players. These mechanism require aligning so don't go pulling apart without a service manual to help re-align the mechanism.

Posted on Apr 06, 2008

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Champion:

An expert who has answered 200 questions.
Expert
275 Answers

Ever heard of CD Lens Cleaner?

Posted on Sep 25, 2006

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
3,130 Answers

Get a lens cleaning disc and try to clean the laser lens first. If that doesnt help, your going to need to have the unit serviced.

Posted on Sep 24, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Disc read err

Looks to me you can put in a variety of disks, But to make sure it is not just a disk that was in the sun or so, try it with a bought DVD. If that still giving problems, you could try to clean the laser, with a special cleaning CD / DVD.
Special if someone smokes in the car.

Read full answer

Jun 12, 2014 • Soundstream VIR7355NRBT Car Video Player

1helpful

1answer

Mpio dvd player 1700pdvx says disc not ready no matter what disk I put in

Likely either a dirty optical pickup or a bad one--if bad usually cheaper to replace the entire unit.

Read full answer

Apr 09, 2012 • Televison & Video

0helpful

1answer

When i put a disc into my portable dvd player it says cannot read disc... it will read cd's but not dvd's do i need to replace the lens?

Try using a DVD cleaning disk in the player first. If this does not fix the problem. The chances are that the calibration is off and you will have to have it serviced at a repair center. How old is the unit, what is the model number and where are you located?

Read full answer

Jun 06, 2011 • Durabrand Two Screen Car DVD Player

0helpful

1answer

My BDP-51FD can not read disc. At the time I bought I already feel it's very picky for the disc. And thing's getting worst later. And now it even showed no disc no matter what kind of disc I put in. I feel...

Try updating the software from Pioneer.com more than likely going to have to put the software update on a disk, burn it, and install it. The old Sony's work the same way but are hard. Good Luck

Read full answer

Dec 23, 2010 • Pioneer BDP-51FD Blu-Ray Player

0helpful

1answer

Hi, my philips dvd player model number dvp3360/05 has stopped reading disks. Wjen it loads a disk instead of going to the start screen it just goes blank and on the LED display it says title. Any ideas on...

Hello,

There are several reasons why your DVD player would stop reading discs.
1. Bad or dirty lens
2. Bad disc spinner motor
3. Busted capacitors on the mailboard

If you can open up your DVD player. Try to check for these problems.

Read full answer

Mar 14, 2010 • Televison & Video

1helpful

1answer

No disc error even with DVD inside the player

I am sure that you have tried using another DVD.
Try putting a Music CD and see if it can read it.
In any case, even if the CD works, it looks that you have a faulty unit the laser on the drive is probably bad now but just in case it is just dirty, try to clean it with a Cleaning Disk and see if the problem disappear.

Read full answer

Dec 23, 2009 • Kaser Corporation Mambo BW MP3 Player

0helpful

1answer

Cyberhome 1200 dvr

try a dvd lens cleaner.

Read full answer

May 12, 2008 • Cyberhome DVR 1600 DVD Recorder

0helpful

1answer

Bad disc message display

when disk is in dvd message reads bad disk.

Read full answer

Apr 22, 2008 • Televison & Video

0helpful

1answer

Check disc

Is the surface or your disk smudged or damaged? If not, try a lens cleaner CD or kit and see if the problem goes away. If they are DVD Rs or something similar(DVD-RAM, DVD+R, ETC) the player may not be able to play that particular format, and you should double check the instruction manual to see what types of disks can be read.

Read full answer

Nov 08, 2007 • Sony DVP-FX810 Portable DVD Player

1helpful

2answers

Durabrad DUR-1700 - No Disc

turn on the power and open the dvd axcess door, inside where the dvd goes is a small little push down switch, push this down, it is in the upper right side. this will let you see if the laser is powering up,if you see no red light ,your laser is bad. hope this helps

Read full answer

Aug 06, 2007 • Durabrand DUR-1700 Portable DVD Player