SOURCE: instructions for the food processor of my Cuisinart Duet
Place the gearbox on top of the blender/food processor
Place the work bowl over the spindle, with the handle facing the front of the machine - make sure the tabs lock into place.
Place the stem adapter on top of the spindle, then the blade.
Place the lid on top of the bowl, with the feed tube facing the back of the food processor. Then the pusher into the feed tube.
Here is the link to the user manual with visuals 9p.6 is most helpful):
http://www.cuisinart.com/share/man/10_man.pdf
-Tha Mp3 Doctor
SOURCE: Manual for Bravetti food processor/ blender model EP 199
I have a manual for the Bravetti Food Processor Model EP 199 that I am just getting ready to put up for sale on Ebay. I can copy the pages of the manual and send them in a email to you if you would like. Just email me at [email protected] and I can send it to you!
Gail
SOURCE: The Blender attachment will not turn, just grinds and smokes.
The motor shaft that spins the teeth that are on the base of the blender may be frozen up for some reason. If you purchased the duet within the last 3 years and have a receipt, call Cuisinart to get it repaired in warranty - even if you don't have a receipt, your serial number may still save you. If you purchased it more than 3 years ago, let me know.
SOURCE: Hamilton Beach food processor, model 70450, cracked bowl
You have a couple of choices here. The quickest and cheapest is to go to the hardware store, or a home depot and get a tube of one minute clear epoxy. This adhesive will repair the crack and since it is clear it will barely show. Plus it will dry in just one minute.
That said, yhou could also go to hamiltonbeach.com and get a new part.
883 views
Usually answered in minutes!
×