Question about Sony Handycam CCD-TRV11 8mm Analog Camcorder

3 Answers

Can not load any cassette even empty cassette holder can not be closed.

Hi, I am not able to load any cassette in my camcorder, even empty cassette holder. If I trying switch on the camera in play or record mode the eject indicator flashing with beep. Suddenly this problem cropped up, during recording the cassette was rejected spontaneous and since that I can not close holder or load cassette anymore. Please help. Thanks,

Posted by gugez gugez on

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I had the same problem and solved it by removing the battery to allow the camera to reset. Worked fine after that.

Posted on Apr 11, 2009

  • Edward Ho
    Edward Ho Aug 15, 2013

    I have a similar problem but when the cassette holder closes it doesn't go back inside the camera. It happened when I dropped the camcorder and I switched the rotating switch to Auto. Is there any way to fix this?

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

These people can fix it alamocameraservice.com

Posted on Jan 08, 2008

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

There is a flex ribbion cable attached to the main assambly and the cassette holder which moves upwards during ejection. this cable gets damaged during normal use. Get replaced it from a camera repairer.

Posted on Sep 25, 2006

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I fix the tape holder system on my camcorder? The door won't lock, and the cassette won't get inside the compartment.

hi,
is it close without a cassette ? if so the reel sensor in the cassette compartment may be faulty. if the head drum not rotates the cassette drive will not work correctly, if so please loosen the head drum with a plastic rod or some tools like that. do not put your finger in hence sometimes will jam your finger. remember don"t touch the scanning chip of the head.
1helpful
1answer

Wont load tape

HI, this is a mechanism fault beep you are hearing. the mechanism and load motor is damaged. you will need to send this unit to the Handy cam repair depot for this repair. you will need a new load motor and loading dock mechanism as well.
1helpful
1answer

Loading tapes

I have the same problem. If I remove the battery for a few seconds, then replace the battery and wait about 5 seconds, the tape compartment closes.
1helpful
1answer
0helpful
2answers

Loading tapes

I had a similar issue where the tape bay would not lock in and engage the motor mechanism to load the tape. I removed the battery from the unit and let it stand for approximately a minute then reinserted the battery. The tape drawer closed first without a tape then reopened with no issue. I then inserted a new tape with no issue. I guess it needed a hard reboot.
0helpful
1answer

The cassette holder isn't closing......and the tape is not loading

Hi
See if this works--If you are on battery there may not be enough power .Charge the battery or use the the mains power through the transformer and see if it works.
Hope this helps
Jay
0helpful
1answer

Cassette holder does not close

Try inserting another tape first. If the trouble is still there,Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.
0helpful
1answer

Tape holder of camcorder isnt closing

Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.
0helpful
1answer

The cassette holder isn't closing......and the tape is not loading

not geting in holder tht mean u must open ur casset holder and put in polethin bag for a hour and it will accept tape
0helpful
1answer

Will Not Load Cassette

I have the zr850 which I have used less than a dozen times, and it does the same thing as you describe. Was told by canon tech people to try a maxell brand tape and a head cleaner tape. Have not tried their sugestion yet. camera is 3 months old.
Not finding what you are looking for?
Sony Handycam CCD-TRV11 8mm Analog Camcorder Logo

887 views

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6302 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...