Black & Decker B1561 Bread Maker Logo

Question about Black & Decker B1561 Bread Maker

3 Answers

Paddle won't come out

I've used my breadmaker for a year now. It was after the second time I used it that the paddle would not come out, and since I always made the same thing, it didn't bother me. However, now I'm trying to use the bake setting and I am afraid the paddle will interfere with the banana bread. How the heck can I get it out of there? It seems to be glued in. Thanks if anyone can help. Vicki

Posted by Vicki Kushner on

  • baker 1955 Dec 10, 2007

    My B1561 doesn't look like the one pictured .The problem I have with not being able to remove the paddle is that now the machine seems to be leaving a dark streak in the dough .I don't know if this is grease or teflon ,but I don't feel right about eating the product .I have repeatedly soaked and wriggled but to no avail.The paddle has to come out before I can replace it,and the price for new paddles is too high.I thinh Black and Decker should replace the whole pan assembly as a sign of good faith

  • Jordash Jan 01, 2008

    When my bread is finished baking, the paddle is baked in the bottom of the bread. When I cut it out, then my bread had a hole in it.



3 Answers


I remove the paddle from the dough after the last kneading ( 1hour and 41 min. left on my machine b1561) and return the dough into the machine for further baking It is so easy to remove the finished bread and there is only a small hole where the stem was !!!!!!! G.D.

Posted on Jan 27, 2008



  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

Fill the container with hot water and dish soap and let it sit for a few minutes and then rinse under hot water and keep rinsing then turn upside down and shake rapidly, keep on repeating this until paddle comes loose. Some of the bread dough has gotten up under the paddle and has baked the paddle onto the shaft. I have had this happen a couple of times. Its a naturally occuring problem that is all part of breadmaking.

Posted on Oct 01, 2007



I've had pretty good results with a crochet hook (use a metal one that can be run through your dishwasher). Insert the hook through the hole in the paddle and it should catch on the far side just enough to pull the paddle out of the loaf. Best to do it before it cools and the crust hardens, though.

Posted on Dec 30, 2006

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Why won't my paddle turn

My paddle won't turn in my Breadman TR 400. - Fixya
Sep 27, 2013 - Posted on Sep 28, 2013.

Breadman TR850 Plus Bread Maker Paddle turn ... - Fixya > ... > Breadman > Breadman TR850 Plus Bread Maker
Paddle won't turn in the breadmaker with any resistance My breadmaker paddle won't turn under pressure. I put all the ingred. in and turn on the machine. Customer Reviews: Breadman BK1050S 2 ..., Inc.Breadman BK1050S 2-Pound Professional Bread Maker with Collapsible ... So thepaddle turns and kneads while it goes in one direction. ... So, while I still love mymachine, I do a lot more bread by hand now. ..... Maybe I got a defective unit... but Iwon't be risking it... sending it back and exchanging for another brand. Breadman 34923 breadmaker paddle.: Bread ..., Inc.
Rating: 3.9 - ‎61 reviews
Turn on 1-Click ordering for this browser .... If I don't scrape down the sides a couple of times during the initial mixing, the loaf won't turn out correctly. ... This paddle fit my Breadman TR520 Programmable Bread Maker for 1-, 1-1/2-, and ...

This machine is a Black and Decker model 2300 breadmaker. One paddle turns well but the second one doesn't turn under pressure. Is this repairable?

Are you certain that it is on the right rod? Have you tried changing it with the one that works? This would help in defining the problem. Best wishes

I can't pause my breadmaker?

That little bit of time won't make any difference. Just remove your paddle and try to get the dough ball back in as soon as you can. Don't worry about 10 or 15 seconds.

WE only have a Silvercrest Breadmaker a few months now and the bread sticks to the Kneading Blades and as a result the bread becomes broken when taking it out of the tin, can you please help.

This is very easily fixed. In fact in the instruction manual it suggests you stop it before baking and remove the blades. After almost a year using it, we have further refined this. As soon as 2nd kneading is done, we pause it, remove the blades, oil up hands with olive oil, and shape it into an approximately cuboid shape, before putting it back in the tin and resuming the programme.

From the 2nd time we used it we did the removing the paddles, but with trial and error have found that shaping the bread means you get a much more even loaf, and later that oiling the hands to do this makes it rise much better, as it prevents the dough sticking to the sides, inhibiting the rise.

By the way, the programmes we use most are no. 8 (mostly), in which case you remove the paddles after 70 mins, and no. 2 (occasionally), where you do it after just after an hour.

Hope this helps, it's certainly made it work much better for us!

I need to replace bread maker paddle

Your model number for the all in one pro should be a B1650 (single paddle model)

If that is correct then this is one source for the paddle:

An informationl note about Black and Decker products is that there are replacement parts for anything they make as long as they have no discontinued the model number. Once the model number is discontinued they have aftermarket replacement parts for 5 years only.
(your replacement paddle is starting to show up as no longer available)

The orignal paddle part number is: 429592-00

Here is a 2nd source for the paddle:
(96 in stock)
Thanks for using FixYa:


I,ve been looking for apaddle for my breeadman ultimate plus model TR 2500BC since over a year.The solution that I tried here doesnt work since that internet site has stopped their activities Herman

Try ebay...


(if link does not work go to ebay ..bread machine paddles and hunt around).

Kneading paddle having problem kneading

Sounds like you might need a new belt. If it works ok with nothing in it but wont when the dough is in there

Missing the dough paddle

I had great success in finding what I wanted for my breadmaker at They have manuals and parts for most breadmakers at very reasonable prices, probably will be around $10.

Bread Machine B2300

this is the second rise period. it is ok, and at this time if you like, you can gently move the dough aside, and remove the paddles. Just remember to put a little oil on the exposed stem. This way, you can have bread without the huge holes from the paddles.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Black & Decker Kitchen Appliances - Others Experts

Cindy Wells

Level 3 Expert

6558 Answers

David Shaub

Level 3 Expert

2994 Answers


Level 3 Expert

3290 Answers

Are you a Black & Decker Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides