When i switch on cts 600 amplifier no power on only red LED flash and crowbar cct's resisters are burn. Please help. ASHFAQ

Hi Ed, I sent you the link to download the user manual of the CTS600 and CTS1200 Crown amplifiers
I hope ter serves to repair your Crown power unit
Greetings Franco Dosil

Hola Ed, te envio el link para que descargues el manual de usuario de los amplificadores Crown modelos CTS600 y CTS1200
Espero ter sirva para reparar tu unidad dee potencia Crown
Saludos Franco Dosil
https://data2.manualslib.com/pdf5/106/10592/1059159-crown/cts600.pdf?48095c310cea414e22394c5d55bb60d2&take=binary
https://www.crownaudio.com/en/product_families/cts-series
https://www.crownaudio.com/en/products/cts-600

Hotpoint red led flashes Washing Machines Questions ...

www.fixya.com > Forum > Tags > red led flashes > Washing Machines

Hotpoint washing machines red led flashes related questions and answers. ... then off When i turn on the washing machine - Hotpoint wf640p - the LED display flashes all the 8s (so ... Question about Aquarius WD640 Front Load Washer/Dryer.

Try pressing the Reset Button, if that does not fix it take it to the repair shop. If you do not have experienc you can do a lot of damage.

Reset the breaker.

Try changing the input device to something you are sure, works such as a DVD player.

Switch off TV manually, switch off power, remove plug and retry after 48 hours.

If problem persists, please refer it to a qualified service technician.

Hi,
The 1 light flash is because of a rollout switch being tripped. they are little switches usually with a red reset button in the center, Sometimes they are a one time burn out device. If they are tripped try to find out why they tripped and fix the problem.
You can find out more here... go to page 39

http://es-co.ru/documentation/price_goodman_gmp_gaz_pech_80/Service_instructions_en.pdf

I hope that this will help you to solve your problem!

Thanks for using Fixya!!

Heatman101

need to check the ff: 1. freon, w/o it power will break at pressure switch 2. fuse 3. a/c switch 4. fan switch 5. relay

There is a problem win the power supply. I would look for swollen/leaking caps and also any cracked , broken devices in that general area and replace them

i suggest using a 4 gauge or smaller i had the same problem. i switched from 8 to 4 and no problems!

From the above symptom, it show that the output stage of the amplifier have some problem.The protection cct come in to cut off the amp. when the output shorted or have Dc voltage.( this is to prevent further damage to the amp. & speaker ).If you know how to repair , just check on the pwr transistor (with heat sink )or else send it to the repair center.hope it help.