Software permanent reseter

Replace a new cartrige. Then try to reset printer absorver permanently-
1.First, download the resetter software that the user majorhazard let the link.
(http://canontips.blogspot.com/2009/02/canon-pixma-ip1200-ip1600-ip2200.html here`s the link by the way.

2.use the regular steps to reset temporal,unplugged the cable, press and hold the power button, reconect the power cable, while holding the power button, press reset button 3 times, turn the printer on.

3.here are the another steps to reset permanently
1.uncompress the Generaltool.exe
2.Run GeneralTool.exe
3.select the USB PORT of the printer
4.hit or click on LOCK RELEASE
5.check the checkboks CLEANING and also EEPROM CLEAR
6.click in the model of printer (My case IP12000e)
7.Click MAIN and PLATEN
8.Click TEST PATTERN 1.
9. that`s all.
10. If you wanna be sure that works just unplugged the printer and reconect(Power cable.)
Thank you

Good Day!

Yes you can download the software, just go to this site!
http://www.canon.com

Thanks and God Bless!

Hello
Although the software resetter for the Canon Pixma MPC190 printers has available on the internet but before using the software you must reset the printer manually. But manual reset can not reset the counter printer permanent, to reset counter permanent require software resetter such MPTool or Serive tool software. Reset for Canon Pixma MPC190 Printers Enter the service mode SERVICE MODE - pressing buttons Menu, Copy, Scan, Copy, Copy Choose TEST MODE. Select 8 PRINTER TEST TEST MODE. Choose 3, EEPROM CLEAR Select 0, INK COUNT Press the Set button. Click Stop / Reset button (return to item 3), and again press the ON / OFF Good Luck

hi....press reset button and colour or black button in the same time until the error gone...


please vote if this can help you....

Besides service tool, mptool is the popularness software to reset printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460. Excess of software that is the program measure of small and amenity of usage. Ability of the software that is to reset level black and color cartridge at canon pixma mp series. And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.
Reset Ink Counter.
Reset ink counter that is resetting ink level (ink metrer) cartridge at printer.

• Reset Black – reset level black ink cartridge.
• Reset Color – reset level colour ink cartridge.

Reset waste ink counter
To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :

• Reset Main (main).
• Reset Platen (additional).

go to this website download this software after that install it follow by instruction that i give to you do reset....
http://www.mediafire.com/file/yan3ytvdumt/MPTool.zip

This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.
vulmec.wordpress.com

my IMEI Number is 357952008027808 plss help me i m open for everybody my phone is Nokia 6600 i need help may god bless you all

Waste Ink Counter Reset:

Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanent
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
"After service mode Pls use software for permanent reset"



Hope that helps! Should you have any further questions,please feel free to post them here.

P.S. - If you find that the solution/answerI provided led you to, or resulted in a fix, please close the ticket with a FixYa!rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

You need to reset the printer!
for more details about software for your printer click HERE

Hello Surs, Wish I could be more confident of this but I couldn?t find much on this series of printer. You didn?t indicate if there were any LED codes being flashed but this is the only reference I could find involving ?6000? and this model printer. Issue: Power light (or Alarm / Power lights) alternate(s) between orange and green 3 times (6000) ________________________________________ Solution: Reset the printer Follow these steps to reset the printer: 1. Turn the printer off with the Power button (if available). 2. Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) . 3. Unplug the printer's power cord for a few seconds, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared). 4. Turn the printer back on. I don?t have a service manual for this printer nor was I able to find one anywhere. From poking around the Canon site it appears that there are other error codes than what is published in their manual or web site so it might be worth a call to the help desk. Let us know if you have any more questions or information and don?t forget to rate the post.