Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

1 Answer

How to clean jura C5 grinder - Impressa Jura Capresso Coffee Makers & Espresso Machines

Posted by Anonymous on

Ad

1 Answer

Dmitry

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How to access grinder itself? Where is it? My Jura C5 doesn't grind coffee beans at all. Firstly grinder has started with starnge noise and then stopped with alarm "no beans", now it doesn't start at all..

Posted on Sep 03, 2012

Ad

2 Related Answers

Anonymous

  • 1 Answer

SOURCE: Jura E9 grinder spins but does not grind

I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn't really turning during the cycle and needed to be cleared. If your beans are "hopping" this may be a different problem.

Posted on Aug 14, 2009

Testimonial: "Grinder is turning but old bean oil is clogging it. Stirring beans on next brewing after drying the grinder was also customer services recommendation"

Ad
mc1bean

Mike Cairns

  • 3053 Answers

SOURCE: I have a Jura Impressa E85 purchased in 2006. The

Hello,
This sometimes happens when after cleaning the machine. I will explain: The beans have a natural oil on them as you know, that also helps coat the hopper for beans to fall. Sometimes when cleaning the machine, the natural oil that is built up around the hopper is not there. Once you brew a cup sometimes the light will go off on its on. If the beans by shaking the machine will not drop down, try using a wooden spoon and help get them going. Other way, is cleaning out the beans completely and then spaying some PAM (used for cooking). What I also did was locate the complete manual for you to download and read page 21 in the trouble shooting area. Here is the link you can copy and paste and put in your browser.
http://www.uk.jura.com/home_uk_x/service_support/download_manual_jura_impressa_e80_e85_english.pdf
I hope this helps you, and please rate my free advice accordingly , thanks Mike

Posted on Oct 14, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jura c5 grinder not turning, machine can still make coffee from ground. new grinder didn't fix it, what next?


Check motor for bad brushes that will not allow unit to turn. This could be all that is wrong with unit.

Sep 12, 2017 | Coffee Makers & Espresso Machines

2 Answers

Jura impressa c5


Just in case somebody else comes looking for this answer. I had the same problem and finally fixed it by unplugging the unit for a bit (don't think this helped) and then simply turning the knob to steam until it stopped. Then it went into the normal standby mode. I think I must have missed the last step in one of the cleaning programs or something.

Aug 03, 2014 | Jura Impressa C5 Super Automatic Coffee...

1 Answer

Hi i have a jura j9 and the grinder got stuck ,i


http://www.ehow.com/how_5121955_troubleshoot-saeco-espresso-machine.html I am afraid that this is the only help I can offer you at this time.

Sep 12, 2013 | Saeco Magic De Luxe Espresso Machine

1 Answer

How to reset the grinder burrs?


I took the grinder apart and found to have to replace the two metal grinding tools (inside cone and outside ring.
The parts for it were quite cheap. Just get yourself a proper instruction how to do it and follow it religiously. There are marks left by Jura engineers to calibrate the grinder assembly. Changing the actual grinder bits inside does not alter these if put together in the same position. The calibration is essential for a decent taste. After 7 years I would recommend a full service anyway. This will not be cheap, but all seals get replaced or just the brewing unit and the machine will be physically cleaned inside. Only a clean machine will give a decent taste. And the usual cleaning and de-scaling you can do is not enough to maintain a squeaky clean machine over the period of a few 1000 cups of coffee.

Mar 08, 2013 | Jura Capresso Impressa Z5 Espresso/Coffee...

2 Answers

Jura E9 grinder spins but does not grind


I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn't really turning during the cycle and needed to be cleared. If your beans are "hopping" this may be a different problem.

Aug 14, 2009 | Jura Capresso Impressa E9 Espresso Machine...

1 Answer

Fill beans message keeps coming up on jura capresso impressa s9


You need to open the grinder, it`s probably packed with old fine powdered coffee that blocks the outlet. Clean this out and try again. Since it works normal when you use pre-ground coffee, there shouldn`t be any problems with any other parts.

Let me know if you want a description for have to open and clean the grinder.

Good luck!

Jun 01, 2009 | Jura Capresso Impressa S9 Coffee...

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

1,831 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

markybean

Level 1 Expert

41 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...