Question about iRiver PMP-120 Digital Media Player

2 Answers

Firmware installation crash

HI, i really need help on this case. I bought a used pmp 120 from eBay. It comes to me with the firmware 1.12 but when i start it it said BOOT FAILURE. I found on the internet how to repair it and all is gone well. I dece ide at that moment to put a new firmware 2.04 on it, it began to install, all is ok but in the middle of installation the battery die and the player shut down. Now, im unable to restart it, seem like he is completely dead. Ive try the reset button, i charge it for over 15 hours with the usb cable and with the power adapter but he didnt start again. Ive also try to take the battery out but that didnt change, he didnt restart. Thanks for your help!!!!

Posted by Stephane Paradis on

  • Anonymous Mar 25, 2008

    pmp 140 boot failure is showing after i try to update it with new firmware from his original website www.iriver.com i need help please.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i check the battery capacity?

Posted on Mar 19, 2008

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

Check your battery capacity if its under 3.7v then you need to rejuvenate it back to that are it will all be fine.

Posted on Mar 15, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

Firmware upgrade for PMP120 iriver

there is no firmware avail at this time but you may check time to time

  • http://local.iriver.com/usa/lounge/loungeList.asp
3helpful
1answer

Dear sir i get a problem with Boot failure every i turn on my pmp-120. i need the solution, please help me!

the latest firmware is 2.04 download HERE and follow instructions. HERE is the download link for the english version of the users manual. I had to add the .zip extension to it to make it extract but to answer your question it does not look like it supports .m4a files. Use THIS to convert yor .m4a files to .mp32_bing.gif so you can play them, it's free to try
2helpful
2answers

My iriver got boot failure,

the latest firmware is 2.04 download HERE and follow instructions. HEREis the download link for the english version of the users manual. I hadto add the .zip extension to it to make it extract but to answer yourquestion it does not look like it supports .m4a files. Use THIS to convert yor .m4a files to .mp32_bing.gif so you can play them, it's free to try
0helpful
1answer

Iriver x20 - freezes and wont show as a connected device to pc

When you connect the PMP to the computer does it say your new device is ready for use or something else like 'the device has malfunctioned'?

I have the same issue that frequently the computer won't see the PMP. Keep trying it sometimes works. If not then its likely that the harddisk is dead or dying.
1helpful
2answers

Boot failure

1st go to Ihttp://www.shamrockman.net/ and dload the version you want to run. My PMP shows 1.23 but I couldn't find that version so I now run 1.24.. Save the dloads in a new folder on your computer.. There should be (7) items that dload to your computer.

*** I have found that just copying the files to your PMP Player will NOT work.***

I had to delete ALL (7) of the system files and folders.
1.) BMP folder
2.) etc folder
3.) system file
4.) (4) "Version-[0x..... " files..

So there were (7) items I had to delete. Once deleted go to the folder you saved the dloads to. I had to click and drag each item to the drive your PMP player is connected to. Once all (7) items have been placed on your PMP player disconnect it, turn off the power, wait a minute and turn it back on. These steps worked PERFECTLY for me. Please let me know in this forum if this helps..

Thanks..
0helpful
2answers

I River Idiot !

Dead Hard Drive. Thats all i can tell you. Did you hit a huge pothole or drop it today? With the way firmware is today you'll juest need to send him in. Sorry to say it, but that's the solution! thanks! Let me know of any followup needed
9helpful
8answers

Iriver PMP-140 boot failure message

when i turn on my Iriver PMP-140 it comes up with a message reading
Boot Failure
System file has an error.
To solve the problem, connect the device to computor.
(refer to 'trouble shooting' on the manuel)
Filmware Ver. 1.24
I dont have a manual though.
0helpful
2answers

Boot failure

Dead Hard Drive. Thats all i can tell you. Did you hit a huge pothole or drop it today? With the way firmware is today you'll juest need to send him in. Sorry to say it, but that's the solution! thanks! Let me know of any followup needed
0helpful
3answers

Iriver pmp 120

i could help you repair this email me at [email protected] i had the same problem i fixed it my self
Not finding what you are looking for?
iRiver PMP-120 Digital Media Player Logo

Related Topics:

946 views

Ask a Question

Usually answered in minutes!

Top iRiver Audio Players & Recorders Experts

Steven Wander
Steven Wander

Level 3 Expert

596 Answers

Ekse

Level 3 Expert

13435 Answers

Joseph Hoffmann

Level 3 Expert

1756 Answers

Are you an iRiver Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...